ZHAN Yi-min, PENG Feng, ZHANG Fan, QIANG Wei, ZHANG Shuan-min, WANG Xiao-ting, CAO Zhan-min. Influence factors for tensile strength of small-diameter liquid-crystalpolymer extruded single-core fiber cable[J]. Journal of Applied Optics, 2013, 34(2): 381-384.
Citation: ZHAN Yi-min, PENG Feng, ZHANG Fan, QIANG Wei, ZHANG Shuan-min, WANG Xiao-ting, CAO Zhan-min. Influence factors for tensile strength of small-diameter liquid-crystalpolymer extruded single-core fiber cable[J]. Journal of Applied Optics, 2013, 34(2): 381-384.

Influence factors for tensile strength of small-diameter liquid-crystalpolymer extruded single-core fiber cable

More Information
  • This paper theoretically analyzed main factors of tensile strength of liquid-crystal po-lymer (LCP) extruded single-core fiber cable with the diameter of 0.5 mm during the forming process. The factors mainly contained temperature feature of the melted LCP, structure parameters of mold core and die sleeve, space between die sleeve and mold core, and tension stringing and traction speed of optical fiber. Results show linear relationship between tensile strength and strengthened story thickness of small-diameter LCP is not ideal. The liquid-crystal polymer extruded fiber cable has maximum tensile strength within a certain diameter.
  • [1]曹维敏,林波. LCP料断裂伸长率的改进及其在光纤护层中的应用[J]. 光纤与电缆及其应用技术, 1992, 8(4): 56-62.
    CAO Wei-min, LIN Bo. Improvement of LCP break elongation and its application in optical fiber coating[J]. Optical Fiber & Electric Cable and Their Applications, 1992, 8(4): 56-62. (in Chinese with an English abstract)
    [2]WILEY J. Production of ultrahigh-modulus liquid-crystal polymer rods[J]. Journal of Polymer Science Part B: Polymer Physics, 1988, 26(2): 1549-1552.
    [3]詹祎民,张栓民,彭峰,等. 液晶聚合物小直径光缆挤塑工艺研究[J]. 应用光学, 2008, 29(6): 999-1003.
    ZHAN Yi-min, ZHANG Shuan-min, PENG Feng, et al. Extrusion process for small-diameter fiber cable made of liquid-crystal polymer[J]. Journal of Applied Optics, 2008, 29(6): 999-1003. (in Chinese with an English abstract)
    [4]BOLES D, CAKMAK M, YALCIN B. A multi-stream flow technique to obtain isotropic texture in extruded thermotropic liquid crystalline polymer melts[J]. Polymer Engineering and Science, 2009, 51(4): 73-80.

    [5]BAIRD D G. Conceots in rheological studies of polymeric liquid crystals[M]. New York: Plenum Press, 2005.
    [6]CHUNG T S. Applied science of liquid crystal polymer[J]. Journal of Polymer Science, 1986, 7(2): 1311-1318.
    [7]CHUNG T S. Thermotropic liquid crystal polymers: thin film polymerization, characteristion, blencls and applications[M]. Lancaster, PA: Crcpress Thchnomic, 2001.
    [8]WARD I M. Developments of oriented polymers-2[J]. Elsevier Applied Science, 1987, 80(6): 1230-1236.
    [9]KRIGDUAM W R, LIU C K, YANG D K. Characteristic of thermotropic liquid crystalline polymer[J]. Journal of Polymer Science B: Polymer Physics, 1988, 7(4): 1052-1059.
    [10]ZACHARIADES A E, PORTER R S. The strength and stiffness of polymers[M]. New York: Marcel Dekker, 1983.
  • Related Articles

    [1]YANG Ruiqin, GENG Bolin, LI Yuan, LIANG Xin, MENG Weidong. New method for measuring liquid diffusion coefficient by equivalent concentration thin layer move[J]. Journal of Applied Optics, 2025, 46(2): 253-259. DOI: 10.5768/JAO202546.0201003
    [2]XIAO Shao-rong, ZHU Run, WANG Ya-ji. Measurement system for atmospheric aerosol extinction coefficient[J]. Journal of Applied Optics, 2012, 33(2): 255-259.
    [3]LIU Gui-xiang, LU Yi, JIN Xiang. Simulation on powder nonlinear coefficients[J]. Journal of Applied Optics, 2009, 30(3): 457-459.
    [4]ZHAN Yi-min, ZHANG Shuan-min, LI Xiao-rui, PENG Feng, QIANG Wei, ZHANG Fan. Extrusion process for small-diameter fiber cable made of liquid-crystal polymer[J]. Journal of Applied Optics, 2008, 29(6): 999-1003.
    [5]YAN Shun-sheng, HU Shun-xing, HU Huan-ling, FAN Guang-qiang. A new derivation method for aerosol extinction coefficient detected by Raman lidar[J]. Journal of Applied Optics, 2008, 29(3): 433-435.
    [6]WU Yao, LI Gao-ping, YU Shuai, WU Lei. Measurement method of thermal loss coefficient of calorimetric laser energy meter[J]. Journal of Applied Optics, 2008, 29(3): 398-402.
    [7]ZHANG Can-lin, CHEN Qian. Matching coefficients for BV-EMCCD and reflective radiation spectra of objects[J]. Journal of Applied Optics, 2008, 29(2): 166-169.
    [8]WANG Jian-hua, FAN Kai-guo, LIU Zhi-feng, SUN Jian-ping, ZHANG Jin-tao, WANG Zhe. Measurement of linear expansion coefficient of silicon in high temperature with laser interferometric dilatometer[J]. Journal of Applied Optics, 2007, 28(5): 645-648.
    [9]WANG Lei, YANG Zhao-jin, LI Gao-ping, ZONG Ya-kang. An Equipment for Measuring the Temperature Coefficient of Refractive Index of Infrared Materials[J]. Journal of Applied Optics, 2005, 26(3): 54-56.
    [10]LI Hong-xia, WU Fu-quan, FAN Ji-yang. Sellmeier Coefficients for the Refractive Indices of Calcite at Crystal Different Temperatures[J]. Journal of Applied Optics, 2004, 25(5): 7-10.

Catalog

    Article views (1967) PDF downloads (322) Cited by()

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return