詹前靖, 刘小勤, 侯再红, 吴毅. 基于动态数据交换技术实现Tracepro的二次开发[J]. 应用光学, 2018, 39(5): 729-734. DOI: 10.5768/JAO201839.0505005
引用本文: 詹前靖, 刘小勤, 侯再红, 吴毅. 基于动态数据交换技术实现Tracepro的二次开发[J]. 应用光学, 2018, 39(5): 729-734. DOI: 10.5768/JAO201839.0505005
Zhan Qianjing, Liu Xiaoqin, Hou Zaihong, Wu Yi. Method for realizing Tracepro redevelopment based on DDE technology[J]. Journal of Applied Optics, 2018, 39(5): 729-734. DOI: 10.5768/JAO201839.0505005
Citation: Zhan Qianjing, Liu Xiaoqin, Hou Zaihong, Wu Yi. Method for realizing Tracepro redevelopment based on DDE technology[J]. Journal of Applied Optics, 2018, 39(5): 729-734. DOI: 10.5768/JAO201839.0505005

基于动态数据交换技术实现Tracepro的二次开发

Method for realizing Tracepro redevelopment based on DDE technology

  • 摘要: 利用动态数据交换通信技术对Tracepro软件进行了二次开发。提出通过使用动态数据交换通信协议中的连接、发送、请求等通用方法,实现二次开发软件传输脚本到Tracepro中仿真,以及调取仿真结果返回二次开发软件的功能。在软件中可以实现模型自动生成、参数自动配置、自动仿真、优化分析等功能,提高了设计效率。以设计LED杯型建模仿真软件的设计为例,在软件中实现了与Tracepro交互,完成了LED快速建模、设计及仿真。

     

    Abstract: The Tracepro software was redeveloped using dynamic data exchange (DDE)communication technology.The universal methods for connection, transmission, request, etc. in DDE communication protocols were proposed to be used, in order to realize the functions of transmitting script from redevelopment software for simulation and then retrieving the simulation results and returning to the redevelopment software. In the software, functions such as automatic model generation, automatic parameter configuration, automatic simulation, and optimization analysis can be realized, which can improve the design efficiency. Taking the design of LED cup modeling and simulation software as an example, the interaction with Tracepro was realized in software, and the rapid modeling, design and simulation of LED were completed.

     

/

返回文章
返回