陈瑞麟, 万生鹏, 贾鹏, 唐晨飞. 基于累加平均的分布式光纤拉曼测温系统[J]. 应用光学, 2018, 39(4): 590-594. DOI: 10.5768/JAO201839.0408002
引用本文: 陈瑞麟, 万生鹏, 贾鹏, 唐晨飞. 基于累加平均的分布式光纤拉曼测温系统[J]. 应用光学, 2018, 39(4): 590-594. DOI: 10.5768/JAO201839.0408002
Chen Ruilin, Wan Shengpeng, Jia Peng, Tang Chenfei. Distributed fiber Raman temperature measurement system based on cumulative average[J]. Journal of Applied Optics, 2018, 39(4): 590-594. DOI: 10.5768/JAO201839.0408002
Citation: Chen Ruilin, Wan Shengpeng, Jia Peng, Tang Chenfei. Distributed fiber Raman temperature measurement system based on cumulative average[J]. Journal of Applied Optics, 2018, 39(4): 590-594. DOI: 10.5768/JAO201839.0408002

基于累加平均的分布式光纤拉曼测温系统

Distributed fiber Raman temperature measurement system based on cumulative average

  • 摘要: 分布式光纤拉曼温度传感(DTS)系统是一套基于光纤中的拉曼散射效应来实现分布式温度监控的系统,利用光纤中拉曼散射光的强度与光纤的温度状态有关的原理对温度进行实时监测。设计了一套9 km的光纤拉曼测温系统,利用数据采集卡对斯托克斯和反斯托克斯光进行采集,在电脑端对温度进行累加平均处理,将微弱的信号从系统的噪声中提取出来,提高其信噪比。在累加平均16 000次的情况下测温精度达到了±2℃。

     

    Abstract: Distributed optical fiber Raman temperature sensor (DTS) system is a set of measuring principle of Raman scattering light in optical fiber, based on the distributed temperature monitoring system, which uses Raman scattering light in optical fiber temperature and fiber strength state related principle for real-time monitoring of temperature. A set of 9 km optical fiber Raman temperature measurement system was designed, the Stokes and the anti-Stokes light was collected by data acquisition card, the temperature was accumulated and averaged at the computer terminal, and the weak signal was extracted from the system noise to increase its signal-to-noise ratio.With accumulative average of 16 000 times, the accuracy of temperature measurement can reach to ±2℃.

     

/

返回文章
返回