付洁, 沈兆国, 唐刚锋, 毛鑫, 程建新, 羊毅. 1.06 μm泵浦PPLT高重复频率人眼安全激光器[J]. 应用光学, 2013, 34(1): 156-160.
引用本文: 付洁, 沈兆国, 唐刚锋, 毛鑫, 程建新, 羊毅. 1.06 μm泵浦PPLT高重复频率人眼安全激光器[J]. 应用光学, 2013, 34(1): 156-160.
FU Jie, SHEN Zhao-guo, TANG Gang-feng, MAO Xin, CHENG Jian-xin, YANG Yi. High repetition rate PPLT eye-safe laser with 1.06 μm pumping[J]. Journal of Applied Optics, 2013, 34(1): 156-160.
Citation: FU Jie, SHEN Zhao-guo, TANG Gang-feng, MAO Xin, CHENG Jian-xin, YANG Yi. High repetition rate PPLT eye-safe laser with 1.06 μm pumping[J]. Journal of Applied Optics, 2013, 34(1): 156-160.

1.06 μm泵浦PPLT高重复频率人眼安全激光器

High repetition rate PPLT eye-safe laser with 1.06 μm pumping

  • 摘要: 利用1.06 m光泵浦周期极化钽酸锂(PPLT)晶体获得1.54 m激光。采用内腔式光参量振荡结构,利用V型腔优化谐振腔参数,分析了OPO晶体内光斑大小随激光工作物质热焦距的变化以及V型腔夹角对光束质量的影响。当泵浦电功率约为100 W时,获得高重复频率10 kHz、脉冲宽度125 ns、平均功率1.9 W的1.54 m激光,电光转换效率约为1.9%。

     

    Abstract: A 1.54 m laser was obtained using periodically poled lithium tantalate (PPLT) crystal pumped by 1.06 m laser. Intracavity optical parametric oscillator(OPO) was adopted and parameters of resonant cavity were optimized by using V-type cavity. The change of the beam spot along with the thermal focus length of gain medium and the impact of the angle of V-type cavity on beam quality were analyzed. As the input electric power was about 100 W, the 1.54 m laser with the repetition rate of 10 kHz, pulsewidth of 125 ns and average power of 1.9 W was acquired, and the electro-optical efficiency of 1.9% was achieved.

     

/

返回文章
返回