ZHENG Li-gong. Testing of precise mirror based on subaperture stitching[J]. Journal of Applied Optics, 2014, 35(1): 85-89.
Citation: ZHENG Li-gong. Testing of precise mirror based on subaperture stitching[J]. Journal of Applied Optics, 2014, 35(1): 85-89.

Testing of precise mirror based on subaperture stitching

More Information
  • In order to solve stitching testing of precise optical flat mirror, based on least squares fitting, we established reasonable stitching algorithms and mathematical models. In addition, relative program was written and a 120 mm precise flat mirror was tested with stitching method. A marked point was used to accomplish the alignments between subspertures. At the same time, relative stitching accuracy was analyzed based on the full aperture testing result and self-examination subaperture testing result. It is proved from the experiment results that there is no gap in the stitching result. The peak value(PV) and root-mean-square(RMS) errors between stitching results and full aperture testing results are 0.020 and 0.002 respectively. The stitching result is in consistent with the full aperture testing result and self-examination testing result, respectively, which proves the reliability and accuracy of the stitching.
  • [1]李新南,张明意. 大口径光学平面的子孔径拼接检验研究[J] . 光学技术, 2006, 32(4):514-517.
    LI Xin-nan, ZHANG Ming-yi. Study on the sub-aperture stitching interferometry for large plane optics optical technique[J] . Optical Technique ,2006,32(4):514-517.(in Chinese with an English abstract)
    [2]张明意,李新南. 子孔径拼接法检测大口径光学镜面精度分析[J]. 应用光学, 2006 ,27(5):446-449.
      ZHANG Ming-yi, LI Xin-nan. Accuracy analysis of stitching interferometry for test of large-diameter mirror[J]. Journal of Applied Optics, 2006, 27(5):446-449. (in Chinese with an English abstract)
    [3]PAUL MURPHY, GARY DEVRIES, FLEIG J, et al.Measurement of high-departure aspheric surfaces using shubaperture stitching with variable null optics[J]. SPIE, 2009,7426:74260P.
    [4]SU Peng. Absolute measurements of large mirrors[D]. Arizona :The University Of Arizona,2008.
    [5]王孝坤, 郑立功, 张学军,等.子孔径拼接干涉检测离轴非球面研究[J]. 光子学报, 2011, 40(1):92-97.
      WANG Xiao-kun, ZHENG Li-gong, ZHANG Xue-jun, et al. Testing an off-axis asphere by subaperture stitching interferometry[J]. Acta Photonica Sinica , 2011, 40(1):92-97. (in Chinese with an English abstract)
    [6]王孝坤. 利用子孔径拼接法测量大口径凸面反射镜[J]. 应用光学, 2013, 34(1):95-100.
      WANG  Xiao-kun .large convex mirror measurement by subaperture stitching interferometry[J]. Journal of Applied Optics ,2013 ,34(1):95-100. (in Chinese with an English abstract)
    [7]WANG Q, CHEN J B, ZHU R H, et al . A new technique for testing large optical flat[J]. SPIE, 1993 ,2003:389-397.
    [8]张蓉竹,石琪凯,蔡邦维,等. 子孔径拼接干涉检测实验研究[J].光学技术, 2004 ,30(2):173-175.
       ZHANG Rong-zhu, SHI Qi-kai, CAI Bang-wei.Sub-aperture stitching interferometry detection experimental [J].Optical Technology,  2004 ,30 (2) :173-175. (in Chinese with an English abstract)
    [9]王孝坤,王丽辉,张学军. 子孔径拼接干涉法检测非球面[J]. 光学精密工程, 2007, 15(2):192-198.
    WANG Xiao-kun, WANG Li-hui, ZHANG Xue-jun. Testing asphere by sub-aperture stitching interferometric method[J]. Optics and Precision Engineering, 2007, 15(2):192-198. (in Chinese with an English abstract)
    [10]闫力松,王孝坤,罗霄,等. 采用三角剖分算法的子孔径拼接检测技术[J]. 红外与激光工程 ,2013,42(7):1793-1797.
    YAN Li-song, WANG Xiao-kun, LUO Xiao, et al. Subaperture testing technology based on triangulation algorithm[J]. Infrared and Laser Engineering, 2013, 42(7):1793-1797. (in Chinese with an English abstract)
    [11]YAN Li-song, WANG Xiao-kun, ZHANG Li-gong, et al. Experimental study on subaperture testing with iterative triangulation algorithm[J]. Optics Express, 2013, 21(19):22628-22644.
  • Related Articles

    [1]LU Zhigong, HE Peng, ZHI Lianjie, CHEN Wenjian. Laser triangulation measurement model based on least square polynomial fitting method[J]. Journal of Applied Optics, 2019, 40(5): 853-858. DOI: 10.5768/JAO201940.0503003
    [2]Yu Guodong, Wu Kexin, Wang Chunyang. Total least square algorithm applied in multi-stationintersection of optical theodolite[J]. Journal of Applied Optics, 2017, 38(6): 917-922. DOI: 10.5768/JAO201738.0602003
    [3]Yang Cheng, Han Sen, Wu Quanying. Method for calibrating interferogram based on weighted least square[J]. Journal of Applied Optics, 2016, 37(3): 392-396. DOI: 10.5768/JAO201637.0302005
    [4]Li Jiang, Yang Peng-li, Li Wen-ting, Wang Zhi, An Jing, Feng Jie, Ma Ai-qiu, Fu Xiao-qing. Annular sub-aperture stitching used for aspheric testing[J]. Journal of Applied Optics, 2015, 36(5): 791-794. DOI: 10.5768/JAO201536.0503005
    [5]Deng Xin, Bai Bo, Li Da-qi, Chen Yong. Measurement error for projective angle of spatial out-of-plane hole system in zero-lock laser gyro[J]. Journal of Applied Optics, 2015, 36(1): 130-133. DOI: 10.5768/JAO201536.0107003
    [6]WU Shi-xia, TIAN Ai-ling, LIU Bing-cai, ZHANG Peng-fei. System error correcting method in sub-aperture stitching[J]. Journal of Applied Optics, 2013, 34(4): 639-643.
    [7]WANG Xiao-kun. Large convex mirror measurement by subaperture stitching interferometry[J]. Journal of Applied Optics, 2013, 34(1): 95-100.
    [8]Testing of large aspheric surfaces by subaperture stitching interferometry[J]. Journal of Applied Optics, 2009, 30(2): 273-278.
    [9]LIU Zhi-ying, ZHANG Lei, HU Yuan, GAO Tian-yuan, WANG Zhi-jian. Application of sub-aperture stitching technique[J]. Journal of Applied Optics, 2008, 29(6): 1009-1012.
    [10]CHEN Hai-yan, LIU Yong-zhi. Prediction-Verification Method Determining the Refractive Index Profile for Ion-exchange Planar Waveguide[J]. Journal of Applied Optics, 2004, 25(3): 20-22.

Catalog

    Article views (2194) PDF downloads (333) Cited by()

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return