GUO Yu, ZHAO Sheng-lu, ZHENG Xue, ZHANG Mei, MA Shi-bang, YANG-Hong, JIANG Chang-lu, KANG Deng-kui. Distortion measurement with inverse imaging method[J]. Journal of Applied Optics, 2013, 34(2): 304-307.
Citation: GUO Yu, ZHAO Sheng-lu, ZHENG Xue, ZHANG Mei, MA Shi-bang, YANG-Hong, JIANG Chang-lu, KANG Deng-kui. Distortion measurement with inverse imaging method[J]. Journal of Applied Optics, 2013, 34(2): 304-307.

Distortion measurement with inverse imaging method

More Information
  • According to the definition of relative distortion, a distortion measurement with inverse imaging method was proposed. We first placed the target on the focus surface of the unit-under-test (UUT), put the entrance pupil position of the UUT at the rotation axis position of the precise turntable, and rotated the UUT from the forward maximum field of view (FOV) to the negative maximum FOV, then measured 14 FOV points and finally obtained the distortion value of each FOV. Distortion value of the whole FOV could not be measured unless the entrance pupil position of the UUT was put at the rotation axis position of precise turntable strictly. The accuracy of focal length measurement is 2 m, and the accuracy of relative distortion measurement is 0.5.
  • [1]王虎,苗兴华,惠彬.短焦距大视场光学系统的畸变校正[J].光子学报,2001,30(11):1409-1411.
    WANG Hu,MIAO Xing-hua,XI Bin.Correction for CCD system distortion,with short focal length and large view angle camera[J].Acta Photonica Sinica,2001,30(11):1409-1411.(in Chinese with an English absaract)
    [2]行麦玲,刘建平,林家明,等.大视场短焦距镜头CCD摄像系统的畸变校正[J].光学技术,2003,29(3):377-379.
    XING Mai-ling,LIU Jian-ping,LIN Jia-ming,et al.Distortion measurement of CCD camera with a large-field,short focal length lens[J].Optical Technique,2003,29(3):377-379.(in Chinese with an English absaract)
    [3]郭羽,杨红,杨照金,等.CCD摄像系统镜头的畸变测量[J].应用光学,2008,29(2):279-282.
    GUO Yu,YANG Hong,YANG Zhao-jin,et al.Distortion measurement of lens in CCD camera system[J].Journal of Applied Optics,2008,29(2):279-282.(in Chinese with an English absaract)
    [4]余俊,林假明,杨建宇,等.CCD摄像系统的畸变测量与校正技术研究[C].青岛:第十一届全国光学测试学会交流会,2006.
    YU Jun,LIN Jia-ming,YANG Jian-yu,et al.Research on distortion calibration of CCD camera system[C].Qingdao:11th National Optical Measurement Conference,2006.(in Chinese)
    [5]杨志文.光学测量[M].北京:北京理工大学出版社,2001.
    YANG Zhi-wen.Optic measurement[M].Beijing:Beijing Science and Technology Univercity Publishing Company,2001.(in Chinese)
    [6]杨照金,范纪红,王雷.现代光学计量与测试[M].北京:北京航空航天大学出版社,2010.
    YANG Zhao-jin,FAN Ji-hong,WANG Lei.Modern times optical metrology and measurement[M].BeiJing: Beijing Aviation and Spaceflight Univercity Publishing Company,2010.(in Chinese)
    [7]徐德衍,王青,高志山,等.现行光学元件检测与国际标准[M].北京:科学出版社,2009.
    XU De-yan,WANG Qing,GAO Zhi-shan,et al. Modern times optics measurement and international standards[M].Beijing.Science Publishing Company,2009.(in Chinese)
    [8]向世明.现代光电子成像技术概论[M].北京:北京理工大学出版社,2010.
    XIANG Shi-ming.Modern times elctric-optic image technology generality[M].Beijing:Beijing Science and Technology Univercity Publishing Company,2010.(in Chinese)
    [9]维克多,索菲尔.衍射光学元件的计算机设计方法[M]. 金国藩,译.天津:天津科学技术出版社,2007.
    VICTOR A.SOIFER E. Methods for computer design of diffractive optical elements[M]. Translated by JIN Guo-fan. Tianjin:Tianjin Science and Technology Publishing Company,2007.(in Chinese)
    [10]苏大图,沈海龙,陈进棒,等.光学测量与像质鉴定[M].北京:北京工业学院出版社,1988.
    SU Da-tu,SHEN Hai-long,CHEN Jin-bang, et al.Optial measurement and image quality evaluation[M].Beijing:Beijing Industry Colledge Publishing Company,1988.(in Chinese)
  • Related Articles

    [1]XU Dongjin, HUANG Yi, DENG Chuanlu, HU Chengyong, ZHANG Xiaobei, WANG Tingyun. Design and research of image transmission systems with fiber bundles in environment of strong electromagnetic interference[J]. Journal of Applied Optics, 2020, 41(6): 1289-1297. DOI: 10.5768/JAO202041.0608001
    [2]LIU Bo, LIU Jun, GAO Ming, LI Yang, ZHANG Wenxi. Optical design of image telecentric lens for optical field multispectral camera[J]. Journal of Applied Optics, 2020, 41(3): 603-610, 617. DOI: 10.5768/JAO202041.0305003
    [3]HAN Peixian, REN Ge, LIU Yong, GUO Junli, ZHOU Jianwei, CUI Zhangang. Optical design of VIS/MWIR dual-band common-aperture system[J]. Journal of Applied Optics, 2020, 41(3): 435-440. DOI: 10.5768/JAO202041.0301001
    [4]LI Li, ZHANG Kaidi. Design of aerospace optical imaging system with high-resolution and ultra-low distortion[J]. Journal of Applied Optics, 2019, 40(3): 363-368. DOI: 10.5768/JAO201940.0301001
    [5]Zhu Xiaodong, Ye Bing, Li Kai, Ma Weidong. Objective lens design of subminiature endoscope with image fiber bundles[J]. Journal of Applied Optics, 2018, 39(3): 418-422. DOI: 10.5768/JAO201839.0305003
    [6]Liu Jun, Zhang Xibin, Gao Ming. Design of cold MWIR/LWIR infrared dualband/dualfield panoramic optical system[J]. Journal of Applied Optics, 2016, 37(3): 456-464. DOI: 10.5768/JAO201637.0306001
    [7]YAN Xiu-qi, FU Yue-gang. Design of laser and mid-wave infrared optical system[J]. Journal of Applied Optics, 2014, 35(2): 221-225.
    [8]CHENG Lei, HE Jun-hua, YAN Ya-dong, LU Wei-tao. Folding dual-band imaging system with controllable exposure[J]. Journal of Applied Optics, 2011, 32(5): 840-844.
    [9]CHEN Yue-cun, TANG Yong. Objective lens design of fiber image-transmitting bundle[J]. Journal of Applied Optics, 2009, 30(1): 110-113.
    [10]ZHU Yun-qing, XU Ming-quan, ZHAO Jin-lin, ZHANG Xi-yue. Structures and applications of ring fiber bundles[J]. Journal of Applied Optics, 2008, 29(supp): 113-116.

Catalog

    Article views (2462) PDF downloads (289) Cited by()

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return