Citation: | TAO Wei, WU Guo-jun, GUAN Yun-tian. Chromatic thermometry used in ceramic sintering process[J]. Journal of Applied Optics, 2012, 33(5): 940-943. |
[1]张金敏. 基于数据融合的陶瓷窑炉温度记录仪的研究[J]. 自动化与仪器仪表, 2010(4):116-118.
ZHANG Jin-min. Development of ceramic kiln temperature recorde based on data fusion technology[J]. Automation & Instrumentation,2010(4):116-118.(in Chinese with an English abstract) [2]陈昌虎,李蔓华,李晓高. 窑炉用热电阻、热电偶智能温度测量板的设计[J]. 中国陶瓷, 2007,43(1):55-57. CHEN Chang-hu,LI Man-hua,LI Xiao-gao. Design of brainpower temperature measurement board used for kilns[J]. China Ceramics, 2007,43(1):55-57. (in Chinese with an English abstract) [3]占春连, 李燕梅, 刘建平,等. 热辐射体真实温度的测试研究[J]. 应用光学, 2002,23(6):39-41,44. ZHAN Chun-lian, LI Yan-mei, LIU Jian-ping, et al. Research onmeasurement of real temperature of thermal rad iator[J]. Journal of Applied Optics, 2002,23(6):39-41,44. (in Chinese with an English abstract) [4]BHATTACHARJEE S. Approximate two-color emission pyrometry [J]. J of Heat TransferTrans of the ASME, 2000,122(1):15-20. [5]李杰,王志敏,吴凤泉,等. 工业用比色测温仪的校准研究[J]. 仪器仪表标准化与计量, 2009(2):21-23. LI Jie, WANG Zhi-min, WU Feng-quan. Research on calibration of comparing color thermometer in industry[J]. Instrument Standardization & Metrology, 2009(2):21-23.(in Chinese with an English abstract) [6]赵英杰,李维军,李萍. 修正的比色测温法在水泥窑图像温度检测系统中的应用研究[J]. 检测与计量, 2009(2):76-78. ZHAO Ying- jie, LI Wei- jun, LI Ping. The application research of the modified method of color comparason temperature measurement in the dynamic image temperature measurement system[J]. Cement Technology, 2009(2):76-78. (in Chinese with an English abstract) [7]周洁,高金睿,王志强,等. 微波烧结法制备TCP/TTCP复合生物陶瓷材料的研究[J]. 硅酸盐通报. 2009,28(3):495-499. ZHOU Jie, GAO Jin-rui, WANG Zhi-qiang, et al. Study on the TCP / TTCP calcium phosphate composite bio-ceramics prepared by microwave sintering method[J]. Bulletin of the Chinese Ceramic Society, 2009,28(3):495-499. (in Chinese with an English abstract) [8]于沿波,王光平,王天赦. 隧道窑烧成带高温参数测量[J]. 耐火材料,1999,33(6):349-350;357. YU Yan-bo, WANG Guang-ping, WANG Tian-she. Measurement of high-temperature parameters in the firing section of the tunnel kiln[J]. Naihuo Cailiao, 1999,33(6):349-350;357. (in Chinese with an English abstract) [9]艾云龙,刘书红,刘长虹,等. 陶瓷材料的微波烧结及研究进展[J]. 热处理技术与装备, 2008,29(3):1- 4. AI Yun-long, LIU Shu-hong, LIU Chang-hong, et al. Development and microwave sintering of ceramic materials[J]. Rechuli Jishu Yu Zhuangbei, 2008,29(3):1-4. (in Chinese with an English abstract) [10]郑维民, 张晓娟. 用红外测温仪观察二极管板流引起的阴极降温现象[J]. 应用光学, 2009,30(1):134-138. ZHENG Wei-min, ZHANG Xiao-juan. Observation of cathode temperature-drop phenomenon caused by diode board-current with IR thermometer[J]. Journal of Applied Optics, 2009,30(1):134-138. (in Chinese with an English abstract) |
[1] | FU Chao, WANG Shiyu, LI Bingbin, LI Lequn. Influence of resonant cavity state on beam pointing stability of high-power Nd:YAG pulsed solid-state laser[J]. Journal of Applied Optics, 2024, 45(6): 1298-1306. DOI: 10.5768/JAO202445.0607003 |
[2] | YAO Linhai, LU Peiguo, YANG Yong'an, LONG Jingyu, YANG Xiulin, BU Yinghua. High precision measurement method of laser beam pointing stability[J]. Journal of Applied Optics, 2022, 43(2): 339-344. DOI: 10.5768/JAO202243.0207001 |
[3] | LI Huifeng, LYU Xinguang. Study on color stability under different light sources based on color difference analysis[J]. Journal of Applied Optics, 2020, 41(6): 1247-1254. DOI: 10.5768/JAO202041.0603005 |
[4] | Ma Gangfei, Yao Wenming, Ju Qiaojun, Tan Huiming, Yang Jianming, Jiang Yu, Gao Jing. 561 nm yellow laser with high stability and low noise[J]. Journal of Applied Optics, 2017, 38(3): 499-505. DOI: 10.5768/JAO201738.0307002 |
[5] | Ma Aiqiu, Yang Pengli, Bai Zhao, Zhang Ming, Fu Xiaoqing, Zeng Bo, Liu Weiguang. Assembling and adjusting technique for#br# improving optical axis stabilization of zoom TV[J]. Journal of Applied Optics, 2016, 37(4): 602-606. DOI: 10.5768/JAO201637.0405002 |
[6] | XU Jiang-tao, CHENG Yao-jin, LIU Feng, LI Min, LIU Bei-bei. Stability of transmission GaAs cathode photoemission of3rd generation image intensifier[J]. Journal of Applied Optics, 2013, 34(3): 489-493. |
[7] | YE Lu. Temperature stability analysis of static angle calibration devices[J]. Journal of Applied Optics, 2012, 33(2): 333-336. |
[8] | ZHANG Qiang, WANG Yue-feng, ZHU Xiao-peng, HOU Jun-yan, WEI Ming. Stability of LD dual-end pumped U-folded resonator Nd∶YVO4 laser[J]. Journal of Applied Optics, 2010, 31(6): 1027-1031. |
[9] | FENG Liu, LIU Hui, CHENG Hong-chang, SHI Feng, SHI Peng-fei, REN Bing, ZHANG Lian-dong. Influence of different Cs-to-O current ratios on sensitivity and stability of activating GaAs photocathodes[J]. Journal of Applied Optics, 2009, 30(4): 654-658. |
[10] | ZHAO De-shuang, LIU Yong-zhi, HUANG Xiu-jiang, ZHANG Chang-ming. Stability of Passively Modelocked Femtosecond Fiber Laser[J]. Journal of Applied Optics, 2005, 26(4): 26-29. |