Design of multi-configuration scanning system for stress birefringence distribution measurement

QI Linkai; LI Kewu; LI Kunyu; WANG Zhibin; LI Jinhua

doi:10.5768/JAO202445.0301003

Journal of Applied Optics > 2024 > 45(3): 608-615. > DOI: 10.5768/JAO202445.0301003

QI Linkai, LI Kewu, LI Kunyu, WANG Zhibin, LI Jinhua. Design of multi-configuration scanning system for stress birefringence distribution measurement[J]. Journal of Applied Optics, 2024, 45(3): 608-615. DOI: 10.5768/JAO202445.0301003

Citation:

PDF (2693 KB)

Design of multi-configuration scanning system for stress birefringence distribution measurement

QI Linkai^{1, 3, 4,},
LI Kewu^{1, 3, 4},
LI Kunyu^{2, 3, 4},
WANG Zhibin^{2, 3, 4, ,},
LI Jinhua^{3, 4}

1.
School of Electrical and Control Engineering, North University of China, Taiyuan 030051, China
2.
School of Instrumentation and Electronics, North University of China, Taiyuan 030051, China
3.
Shanxi Optoelectronic Information and Instrument Engineering Technology Research Center, Taiyuan 030051, China
4.
Institute of Frontier and Interdisciplinary Sciences, North University of China, Taiyuan 030051, China

More Information

Received Date: July 26, 2023
Revised Date: September 18, 2023
Available Online: April 02, 2024

Graphical Abstract

Abstract

Abstract

In order to measure the stress birefringence distribution of optical samples with different configurations, a multi-configuration scanning system for birefringence distribution measurement was designed based on the double elastic light modulation method. The system not only ensured the high resolution of the measurement, but improved the measurement accuracy and breadth by keeping the laser stationary and making the sample move quickly. In terms of sample measurement, the 633 nm (1/4) glass was adopted to test, the relative error of the detection results was 0.79%~0.95%, with a variation range of 0.12 nm, and the standard deviation was 0.035 2. The variation range of the BK7 glass sample was 0.25 nm, and the standard deviation of the experimental results was 0.038 9. For scanning accuracy, the continuous scanning accuracy error does not exceed 0.05 mm, and the continuous inching scanning accuracy error is less than 0.009 mm. According to the above two experimental results, it can be concluded that the multi-configuration scanning system can effectively solve the problem of high precision stress birefringence measurement in any area of the sample.
- multi-configuration scanning system,
- elastic light modulation,
- stress birefringence,
- PC computer design

FullText(HTML)

References (15)

References

[1]	肖昊苏, 张运强, 范志刚, 等. 偏振干涉法测量晶体应力双折射精度分析[J]. 红外与激光工程,2011,40(2):271-276. XIAO Haosu, ZHANG Yunqiang, FAN Zhigang, et al. Precision analysis of polarization interference method for measuring stress birefringence of crystal[J]. Infrared and Laser Engineering,2011,40(2):271-276.
[2]	左芬, 陈磊, 徐晨. 1/4波片相位延迟分布的动态测量[J]. 光子学报,2008,37(11):2296-2299. ZUO Fen, CHEN Lei, XU Chen. Dynamic phase-shifting interferometry for full field retardation distributing of quarter wave plate[J]. Acta Photonica Sinica,2008,37(11):2296-2299.
[3]	李金鹏, 陈磊, 乌兰图雅, 等. 基于移相算法的玻璃应力延迟量快速测量方法[J]. 光学学报,2013,33(6):125-129. LI Jinpeng, CHEN Lei, WU Lantuya, et al. A method based on phase shifting algorithm for fast measurement of stress retardation of optical glass[J]. Acta Optica Sinica,2013,33(6):125-129.
[4]	王金伟, 李克武, 景宁, 等. 波片相位延迟量测量和快轴标定系统[J]. 红外与激光工程,2019,48(2):211-216. WANG Jinwei, LI Kewu, JING Ning, et al. Phase retardation measurement and fast axis calibration system for wave plate[J]. Infrared and Laser Engineering,2019,48(2):211-216.
[5]	王雷, 许荣国, 阴万宏, 等. 光学元件残余偏振测量方法与装置[J]. 应用光学,2021,42(6):1080-1085. doi: 10.5768/JAO202142.0603004 WANG Lei, XU Rongguo, YIN Wanhong, et al. Testing method and equipment for residual polarization of optical lens[J]. Journal of Applied Optics,2021,42(6):1080-1085. doi: 10.5768/JAO202142.0603004
[6]	张瑞, 陈媛媛, 景宁, 等. 基于双弹光差频调制的中红外波片相位延迟高精度测量[J]. 光学学报,2019,39(3):184-190. ZHANG Rui, CHEN Yuanyuan, JING Ning, et al. High-precision measurement of mid-infrared waveplate phase retardation based on dual photoelastic difference frequency modulation[J]. Acta Optica Sinica,2019,39(3):184-190.
[7]	古兆兵, 郝淑杰, 王雷, 等. 一种基于旋转1/4波片法的激光偏振度测量仪[J]. 应用光学,2018,39(6):936-941. GU Zhaobing, HAO Shujie, WANG Lei, et al. Laser polarimeter based on rotary 1/4 waveplate[J]. Journal of Applied Optics,2018,39(6):936-941.
[8]	宋连科, 牛明生, 韩培高, 等. 基于电光补偿测量的光相位延迟拓展测量法[J]. 光学技术,2017,43(3):199-202. SONG Lianke, NIU Mingsheng, HAN Peigao, et al. Optical phase delay expansion measuring method based on electro-optical compensation measurement[J]. Optical Technique,2017,43(3):199-202.
[9]	李继扬, 谈宜东, 吴季, 等. 基于激光回馈效应的液晶双折射特性测量[J]. 红外与激光工程,2017,46(3):114-119. LI Jiyang, TAN Yidong, WU Ji, et al. Birefringence measurement of liquid crystals based on laser feedback effect[J]. Infrared and Laser Engineering,2017,46(3):114-119.
[10]	肖石磊, 李斌成. 光学元件残余应力无损检测技术概述[J]. 光电工程,2020,47(8):51-61. XIAO Shilei, LI Bincheng. Residual stress measurement methods of optics[J]. Opto-Electronic Engineering,2020,47(8):51-61.
[11]	马响, 邓勇, 张书练. 激光回馈半钢化玻璃应力双折射测量技术[J]. 激光技术,2020,44(3):371-376. doi: 10.7510/jgjs.issn.1001-3806.2020.03.018 MA Xiang, DENG Yong, ZHANG Shulian. Stress birefringence measurement technology of heat strengthened glass based on laser feedback[J]. Laser Technology,2020,44(3):371-376. doi: 10.7510/jgjs.issn.1001-3806.2020.03.018
[12]	李克武, 王黎明, 王志斌, 等. 弹光调制和电光调制联合测剩余双折射[J]. 中国激光,2016,43(5):208-215. LI Kewu, WANG Liming, WANG Zhibin, et al. Measurement of residual birefringence combined photo-elastic modulation with electro-optic modulation[J]. Chinese Journal of Lasers,2016,43(5):208-215.
[13]	王爽, 韩燮, 李晓, 等. 弹光调制测椭偏参量的数字锁相数据处理[J]. 光学精密工程,2018,26(6):1314-1321. doi: 10.3788/OPE.20182606.1314 WANG Shuang, HAN Xie, LI Xiao, et al. Digital phase-locked data processing for ellipsometric parameter measurements based on photoelastic modulation[J]. Optics and Precision Engineering,2018,26(6):1314-1321. doi: 10.3788/OPE.20182606.1314
[14]	刘梓良, 王志斌, 李克武, 等. 一种弹光调制器精确定标微系统设计[J]. 光学技术,2022,48(1):8-13. LIU Ziliang, WANG Zhibin, LI Kewu, et al. A precise calibration microsystem for photoelastic modulator[J]. Optical Technique,2022,48(1):8-13.
[15]	杜洽伟, 李克武, 王志斌. 基于弹光调制的双折射测试系统数据处理研究[J]. 光学技术,2023,49(1):64-69. DU Qiawei, LI Kewu, WANG Zhibin. Study on data processing of birefringence measurement system based on photoelastic modulation[J]. Optical Technique,2023,49(1):64-69.

Cited By

Cited by

Periodical cited type(6)

1.	李雪琴，唐艳妮，刘芯，何楚洹，芦静. 基于牛顿环的拓展性实验方案设计. 物理通报. 2023(10): 116-119+126 .
2.	杜修忻，田浩亮，王浩，金国，张保森，王长亮，郭孟秋，王天颖，张昂，肖晨兵. 智能应力或结构损伤自敏涂层研究现状及展望. 装备环境工程. 2021(06): 77-86 .
3.	郭长立，黄璋. 光学玻璃弹性模量的自动化测量方法. 应用光学. 2020(04): 868-874 . 本站查看
4.	赵旺，周薇薇，平兆艳，郑庆华. 牛顿环等厚干涉的实验仿真与智能分析. 山西能源学院学报. 2019(02): 100-102 .
5.	郭长立，冯小强. 光学玻璃挠曲刚度的光学测量方法研究. 光学技术. 2018(02): 231-236 .
6.	杨易，郭长立，郭朝霞，冯小强. 基于图像处理的牛顿环应力测量方法. 实验室研究与探索. 2017(08): 71-76 .

Other cited types(7)

Get Citation

PDF

XML

Article views (78) PDF downloads (29) Cited by(13)

Turn off MathJax

Article Contents

Abstract

References

Design of multi-configuration scanning system for stress birefringence distribution measurement