Methods for sharing target information with different EO platforms and error analysis

Zhao Qinglin; Yu Yunqi; Guo Xinsheng; Yan Ning; Li Hui; Shi Leilei; Li Qiong

doi:10.5768/JAO201839.0102006

Journal of Applied Optics > 2018 > 39(1): 76-82. > DOI: 10.5768/JAO201839.0102006

Zhao Qinglin, Yu Yunqi, Guo Xinsheng, Yan Ning, Li Hui, Shi Leilei, Li Qiong. Methods for sharing target information with different EO platforms and error analysis[J]. Journal of Applied Optics, 2018, 39(1): 76-82. DOI: 10.5768/JAO201839.0102006

Citation:

PDF (647 KB)

Methods for sharing target information with different EO platforms and error analysis

Xi'an Institute of Applied Optics, Xi'an 710065, China

More Information

Received Date: July 05, 2017
Revised Date: October 15, 2017

Graphical Abstract

Abstract

Abstract

In order to satisfy the requirement that the vehicular electro-optical reconnaissance system can quickly share target information to relevant auxiliary weapon system real-timely in wild environment, a method for sharing target information of different photoelectric platforms, as well as the error analysis of this method are presented.By introducing the informations such as the attitude angle of auxiliary weapon platform and the attitude angle of EO reconnaissance platform, the method can transmit the target information detected by EO reconnaissance system to auxiliary weapon system precisely in real time.In order to verify the correctness of the method, through the modeling analysis, it is concluded that the method can realize the sharing of target information.The error of the method is analyzed by simulation test, results show that the target information after conversion by the method can improve by about 3.5 m in terms of accuracy compared with the direct use of the collected target information.
- electro-optical reconnaissance,
- target information,
- shaft system conversion,
- attitude angle

FullText(HTML)

References (12)

References

[1]	刘晶红, 孙辉, 张葆红, 等.航空光电成像平台的目标自主定位[J].光学精密工程, 2007, 15(8):1305-1310. doi: 10.3321/j.issn:1004-924x.2007.08.026 LIU Jinghong, SUN Hui, ZHANG Baohong, et al.Target self-determination orientation based on aerial photoelectric imaging platform[J].Optics and Precision Engineering, 2007, 15(8):1305-1310. doi: 10.3321/j.issn:1004-924x.2007.08.026
[2]	史辉, 郝晰辉, 杨玉淳, 等.光电侦察系统目标定位精度评价指标研究[J].应用光学, 2012, 33(3):446-451. http://d.old.wanfangdata.com.cn/Periodical/yygx201203002 SHI Hui, HAO Xihui, YANG Yuchun, et al.Target location accuracy evaluation index of electro-optical reconnaissance system[J].Journal of Applied Optics, 2012, 33(3):446-451. http://d.old.wanfangdata.com.cn/Periodical/yygx201203002
[3]	彭富伦, 王静, 吴颐雷, 等.车载光电侦察系统目标定位及误差分析[J].应用光学, 2014, 35(4):557-562. http://d.old.wanfangdata.com.cn/Periodical/yygx201404002 PENG Fulun, WANG Jing, WU Yilei, et al.Object positioning and error analysis of vehicular electro-optical reconnaissance system[J]. Journal of Applied Optics, 2014, 35(4):557-562. http://d.old.wanfangdata.com.cn/Periodical/yygx201404002
[4]	杨松普, 王养柱, 胡永浩.光电侦察平台目标定位方法研究[J].电光与控制, 2014, 21(2):9-11. doi: 10.3969/j.issn.1671-637X.2014.02.003 YANG Songpu, WANG Yangzhu, HU Yonghao.Research on positioning method of photoelectric reconnaissance platform[J]. Electronics Optics & Control, 2014, 21(2):9-11. doi: 10.3969/j.issn.1671-637X.2014.02.003
[5]	郭新华.基于精确打击的遥控武器站关键技术研究[D].南京: 南京理工大学, 2016. GUO Xinhua.The key techniques based on the precision of remote weapon station[D].Nanjing: Nanjing university of Science & Technology, 2016.
[6]	任永亮, 范大鹏.遥控武器站发展对我国火控武器的影响[J].武器装备自动化, 2008, 27(10):11-14. http://d.old.wanfangdata.com.cn/Periodical/bgzdh200810005 REN Yongliang, FAN Dapeng. Influence of telecontrol weapon station development on national firepower control[J]. Armament Automation, 2008, 27(10):11-14. http://d.old.wanfangdata.com.cn/Periodical/bgzdh200810005
[7]	贾永前.遥控武器站相关技术与发展趋势[J].四川兵工学报, 2010, 31(6):48-51. http://d.old.wanfangdata.com.cn/Periodical/scbgxb201006016 JIA Yongqian.Weapon station related technologies and development trend[J]. Journal of Sichuan Ordnance, 2010, 31(6):48-51. http://d.old.wanfangdata.com.cn/Periodical/scbgxb201006016
[8]	陈文建.光电仪器之间的轴系补偿方法探讨[J].应用光学, 2003, 24(4):42-45. doi: 10.3969/j.issn.1002-2082.2003.04.012 CHEN Wenjian.A method of shafting compensation between electro-optical systems[J]. Journal of Applied Optics, 2003, 24(4):42-45. doi: 10.3969/j.issn.1002-2082.2003.04.012
[9]	曹晖, 彭富伦, 王虎, 等.车载周视观瞄平台异轴同步及任意距离修正问题分析及程序实现[J].应用光学, 2009, 30(4):567-574. doi: 10.3969/j.issn.1002-2082.2009.04.007 CAO Hui, PENG Fulun, Wang Hu, et al.Correction of different-axis synchronization and arbitrary instance for vehicle panoramic sight platform[J].Journal of Applied Optics, 2009, 30(4):567-574. doi: 10.3969/j.issn.1002-2082.2009.04.007
[10]	陈博, 黄翔, 李泷杲.一种改进的Bursa模型在坐标转换中的应用[J].机械制造与自动化, 2015, 44(3):87-89. doi: 10.3969/j.issn.1671-5276.2015.03.028 CHEN Bo, HUANG Xiang, LI Shuanggao.Application of improved bursa model in coordinate transformation[J].Machine Building Automation, 2015, 44(3):87-89. doi: 10.3969/j.issn.1671-5276.2015.03.028
[11]	宋克洲, 何波, 赵臣俊, 等.某型号周视镜总体设计技术分析[J].应用光学, 2015, 36(6):841-845. http://d.old.wanfangdata.com.cn/Periodical/yygx201506004 SONG Kezhou, HE Bo, ZHAO Chenjun, et al. Technical analysis on overall design of XXX panoramic sight[J]. Journal of Applied Optics, 2015, 36(6):841-845. http://d.old.wanfangdata.com.cn/Periodical/yygx201506004
[12]	张燕.车长周视瞄准镜装调工艺技术研究[D].西安: 西安工业大学, 2013. ZHANG Yan.Research on the commander panoramic sight alignment technology[D]. Xi'an: Xi'an Technological University, 2013.

[1]	MO Yuxiao, ZHOU Ziye, FAN Chenguang, YANG Yujing, TIAN Zhen. Modal testing and kinetic finite element correction of mirror assemblies for co-phase devices[J]. Journal of Applied Optics, 2024, 45(6): 1147-1157. DOI: 10.5768/JAO202445.0601006
[2]	ZHAO Xinyu, JIANG Xingfang, RUAN Zhiqiang, ZHANG Lei. Research and simulation of fiber sensor for weak magnetic field detection[J]. Journal of Applied Optics, 2024, 45(4): 873-878. DOI: 10.5768/JAO202445.0408002
[3]	XU Zhixiang, WANG Zhenggong, HUANG Yimin, WANG Yu. Numerical study on surface defects detection of plate with transition fillet by laser ultrasound[J]. Journal of Applied Optics, 2020, 41(1): 214-219. DOI: 10.5768/JAO202041.0107005
[4]	HUANG Yanjie, SHANG Jianhua, REN Lihong, CHENG Xiaojin. Finite element simulation in laser ultrasound for non-destructive testing of aluminum defect materials[J]. Journal of Applied Optics, 2019, 40(1): 150-156. DOI: 10.5768/JAO201940.0107004
[5]	Zhang Dehai, Li Yanqin, Liu Jianxiu, Xie Guizhong, Tian Shuxia, Guo Changjiang. Strain optical detection technology applied for bi-metal clad plate using digital speckle correlation method[J]. Journal of Applied Optics, 2018, 39(6): 873-879. DOI: 10.5768/JAO201839.0603004
[6]	Lu Weitao, Zhang Shuanmin, Chen Anfeng, Qiang Wei, Wang Cheng, Wang Jian. High sensitive fiber strain sensor[J]. Journal of Applied Optics, 2017, 38(5): 848-851. DOI: 10.5768/JAO201738.0508002
[7]	Wang Kang, Gu Jin-liang, Luo Hong-e. Dynamic calibration for Bragg grating strain measurement system[J]. Journal of Applied Optics, 2015, 36(6): 913-917. DOI: 10.5768/JAO201536.0603003
[8]	YANG Peng-ling, WANG Qun-shu, FENG Guo-bin, LIU Fu-hua, CHENG Jian-ping. A dynamic strain sensor with fiber Bragg gratings[J]. Journal of Applied Optics, 2008, 29(supp): 105-108.
[9]	CAO Yu-dong, WANG Shi-bin, QI Shuang-xi. Carrier fringe method of Moiré interferometry applied to tiny strain measurement in micro-field[J]. Journal of Applied Optics, 2007, 28(5): 636-640.
[10]	ZHAO Shi-bin, ZHAO Jia, ZHANG Cun-lin, DING You-fu, LI Yan-hong. Finite element simulation and analysis for type identification of defects under material surfaces in infrared thermal wave nondestructive detection[J]. Journal of Applied Optics, 2007, 28(5): 559-563.

Cited By

Cited by

Periodical cited type(2)

1.	杜曼殊，林晓辉，杨佳羽，刘建春，张东旭. 核酸检测系统荧光激发光路的标定方法. 激光与光电子学进展. 2022(07): 162-167 .
2.	赵帅，张云昊. 手持式可见-近红外光谱陈皮分析仪系统研究. 光电技术应用. 2022(06): 7-12 .

Other cited types(2)

Get Citation

PDF

XML

Article views (720) PDF downloads (141) Cited by(4)

Turn off MathJax

Article Contents

Abstract

References

Methods for sharing target information with different EO platforms and error analysis