Effect of working angle on system sensitivity in laser triangulation

Bai Fuzhong; Zhang Xiaoyan; Liu Zhen; Gao Xiaojuan; Wang Ying

doi:10.5768/JAO201738.0507001

Journal of Applied Optics > 2017 > 38(5): 826-830. > DOI: 10.5768/JAO201738.0507001

Bai Fuzhong, Zhang Xiaoyan, Liu Zhen, Gao Xiaojuan, Wang Ying. Effect of working angle on system sensitivity in laser triangulation[J]. Journal of Applied Optics, 2017, 38(5): 826-830. DOI: 10.5768/JAO201738.0507001

Citation:

PDF (1467 KB)

Effect of working angle on system sensitivity in laser triangulation

College of Mechanical Engineering, Inner Mongolia University of Technology, Hohhot 010051, China

More Information

Received Date: August 28, 2016
Revised Date: March 13, 2017

Graphical Abstract

Abstract

Abstract

Through analyzing sensitivity formula of laser triangulation measuring system, effect of optical structure parameters on system sensitivity is analyzed, which mainly include measured surface fluctuation, magnification of imaging system and working angle as well. Additionally, laser triangulation system of surface roughness is established, and influence of working angle on sensitivity is experimentally studied. Results show that larger working angle can achieve higher system sensitivity. However, when working angle is large, it needs to consider optical magnification and working angle on sensitivity of integrated influence and ensure that intensity of light receiver is greater than its sensitivity. For measuring system used in this paper, working angle corresponding to highest sensitivity equals to about 70°.
- laser triangular method,
- system's sensitivity,
- working angle,
- surface roughness

FullText(HTML)

References (13)

References

[1]	胡庆英.激光三角法及其在几何测量中的应用[J].宇航计测技术, 1996(2):10-14. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=QK199600605131 Hu Qingying. Application of laser triangulation in geometry measurement[J].Practical Measurement Technology, 1996(2):10-14. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=QK199600605131
[2]	刘维, 韩旭东, 艾华.激光三角法在位移测量中的应用[J].光学精密工程, 2004, 12(4):104-107. http://d.old.wanfangdata.com.cn/Periodical/gxjmgc2004z2026 Liu Weil, Han Xudong, Ai Hua.Application of laser triangulation in displacement measurement[J].Optics and Precision Engineering, 2004, 12(4):104-107. http://d.old.wanfangdata.com.cn/Periodical/gxjmgc2004z2026
[3]	王晓嘉, 高隽, 王磊.激光三角法综述[J].仪器仪表学报, 2004, 25(4):602-604. http://d.old.wanfangdata.com.cn/Periodical/yqyb2004z3185 Wang Xiaojia, Gao Jun, Wang Lei. Survey on the triangulation[J]. Chinese Journal of Science Instrument, 2004, 25(4): 602-604. http://d.old.wanfangdata.com.cn/Periodical/yqyb2004z3185
[4]	邢冀川, 罗小红.利用激光三角法测量货车车厢体积[J].红外与激光工程, 2012, 41(11):3084-3087. http://d.old.wanfangdata.com.cn/Periodical/hwyjggc201211042 Xing Jichuan, Luo Xiaohong. Measurement of truck carriage volume with laser triangulation[J]. Infrared and Laser Engineering, 2012, 41(11):3084-3087. http://d.old.wanfangdata.com.cn/Periodical/hwyjggc201211042
[5]	杨贵栓, 陈涛, 张志峰.基于激光三角法对透明平板厚度测量光线补偿的研究及应用[J].中国激光, 2015, 42(7):1-3. http://d.old.wanfangdata.com.cn/Conference/9541669 Yang Guishuan, Chen Tao, Zhang Zhifeng. Study and application on transparent plate thickness measurement based on laser Ttriangulation with light compensation[J].Chinese Journal of Lasers, 2015, 42(7):1-3. http://d.old.wanfangdata.com.cn/Conference/9541669
[6]	冯俊艳, 冯其波, 匡萃方.高精度激光三角位移传感器的技术现状[J].应用光学, 2004, 25(3):33-36. doi: 10.3969/j.issn.1002-2082.2004.03.011 Feng Junyan, Feng Qibo, Kuang Cuifang.Present status of high precision laser displacement sensor based on triangulation[J].Journal of Applied Optics, 2004, 25(3):33-36. doi: 10.3969/j.issn.1002-2082.2004.03.011
[7]	钱晓凡, 吕晓旭, 钟丽云, 等.提高激光三角法测量精度的新方法[J].激光杂志, 2000, 21(3):54-55. doi: 10.3969/j.issn.0253-2743.2000.03.026 Qian Xiaofan, Lv Xiaoxu, Zhong Liyun, et al. A novel method for improving measuring accuracy in laser triangle method[J].Laser Journal, 2000, 21(3):54-55. doi: 10.3969/j.issn.0253-2743.2000.03.026
[8]	李东东, 王永强, 许增朴, 等.激光三角法在物体倾斜时的测量误差研究[J].传感器与微系统, 2015, 34(2):28-36. doi: 10.13873/J.1000-9787(2015)02-0028-02 Li Dongdong, Wang Yongqiang, Xu Zengpu, et al.Research on measurement error while workpiece surface is inclining by laser triangulation[J].Transducer and Microsystem Technologies, 2015, 34(2):28-36. doi: 10.13873/J.1000-9787(2015)02-0028-02
[9]	何凯, 陈星, 王建新, 等.高精度激光三角位移测量系统误差分析[J].光学与光电技术, 2013, 11(3):67-71. http://d.old.wanfangdata.com.cn/Periodical/gxygdjs201303014 He Kai, Chen Xing, Wang Jianxin, et al. Analysis of error in high precision laser triangulation displacement measurement system[J].Optics & Optoelectronic Technology, 2013, 11(3):67-71. http://d.old.wanfangdata.com.cn/Periodical/gxygdjs201303014
[10]	褚俊, 李顶根, 罗锋, 等.激光三角法位移测量中光强度的模糊自适应控制[J].红外与激光工程, 2013, 42(6):1459-1462. http://d.old.wanfangdata.com.cn/Periodical/hwyjggc201306013 Chu Jun, Li Dinggen, Luo Feng, et al. Fuzzy adaptive control of light intensity in laser triangulation displacement measurement[J].Infrared and Laser Engineering, 2013, 42(6):1459-1462. http://d.old.wanfangdata.com.cn/Periodical/hwyjggc201306013
[11]	周兴敏, 刘恒彪, 葛剑敏.激光三角测量中物面反射光斑重心偏移的修正[J].光学学报, 2015, 35(5):1-5. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=gxxb201505021 Zhou Xingmin, Liu Hengbiao, Ge Jianmin. Reflected spot center offset correction in laser triangulation measurement[J]. Acta Optica Sinica, 2015, 35(5):1-5. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=gxxb201505021
[12]	戴立铭, 江憧君.激光三角测量传感器的精密位移测量[J].仪器仪表学报, 1994, 15(4):400-404. Dai Liming, Jiang Tongjun.The laser triangulation measuring sensor for accurate displacement measurement[J]. Chinese Jounal of Scientific Instrument, 1994, 15(4):400-404.
[13]	卢晋人, 黄元庆.激光三角法测量表面形貌[J].厦门大学学报:自然科学版, 2004, 43(1):50-53. http://d.old.wanfangdata.com.cn/Periodical/xmdxxb200401013 Lu Jinren, Huang Yuanqing. Laser triangulation method for surface measurement[J]. Journal of Xiamen University:Natural Science, 2004, 43(1):50-53. http://d.old.wanfangdata.com.cn/Periodical/xmdxxb200401013

[1]	WANG Xinqiang, QIN Shan, SUN Xiaobing, XIONG Wei, YE Song, WANG Fangyuan, TONG Xuanke. Rapid measurement of sludge sedimentation ratio based on polarization information[J]. Journal of Applied Optics, 2025, 46(1): 121-128. DOI: 10.5768/JAO202546.0103001
[2]	YANG Jiayu, ZENG Juntian, XI Bangchao, LIU Guoqiang, HUANG Shaolei, ZHANG Dongxu. Multiple real-time fluorescence detection system for rapid on-site nucleic acid detection[J]. Journal of Applied Optics, 2023, 44(4): 859-867. DOI: 10.5768/JAO202344.0403007
[3]	KANG Yixuan, LIU Yu, WANG Yawei, ZHOU Lijun, GUO Cheng, WANG Yitian. DETR-based binocular measurement system in road environment[J]. Journal of Applied Optics, 2023, 44(4): 786-791. DOI: 10.5768/JAO202344.0402003
[4]	LIU Xin, WANG Cong, LIU Yongqiang, YUAN Yang, CHEN Xiaolei, ZHANG Yu, HAN Juanni, ZHANG Chaofan. Rapid Ritchey-Common measurement method of large-aperture flat mirror[J]. Journal of Applied Optics, 2022, 43(4): 707-713. DOI: 10.5768/JAO202243.0403003
[5]	HUANG Zhanhua, ZHANG Hanxiao, CAO Yusheng, CHEN Zhilin, SHEN Muhong. Real-time and fast detection system of arrayed filament diameter[J]. Journal of Applied Optics, 2021, 42(6): 1011-1016. DOI: 10.5768/JAO202142.0602001
[6]	Shen Yong, Guo Tiantai, Kong Ming, Zhao Jun, Shen Haidong. Application of D-ELM in quantitative analysis of FTIR spectrum of mine gas[J]. Journal of Applied Optics, 2016, 37(5): 725-729. DOI: 10.5768/JAO201637.0503003
[7]	Ye Su, Ye Yu-tang, Liu Juan-xiu, Liu Lin, Du Chun-lei. Error compensation for trim puncher based on rapid super-resolution measurement[J]. Journal of Applied Optics, 2015, 36(3): 454-459. DOI: 10.5768/JAO201536.0305002
[8]	FENG Ding, LI Deng-ao, ZHAO Ju-min. Design of pulverized coal calorific value detection system based on near infrared[J]. Journal of Applied Optics, 2014, 35(1): 111-115.
[9]	ZHAO Wen-feng, JI Ming, LIU Tao, ZHANG Kui-jia, MENG He-min. Design of portable multi-band and multi-axis parallel detector[J]. Journal of Applied Optics, 2013, 34(2): 319-324.
[10]	WANG Shu-jun, ZHANG Bao-zhou. Design of Spectral Reflectance Measuring System in Original Position[J]. Journal of Applied Optics, 2005, 26(4): 58-60.

Cited By

Cited by

Periodical cited type(5)

1.	闫烁，万嵩林，李瀚捷，韩宜池，牛振岐，吴珍，路晴，江国昌，沈鹏程，魏朝阳. 离轴非球面干涉测量中标记点最优排布求解与畸变误差校正方法（特邀）. 光学学报(网络版). 2024(03): 33-42 .
2.	罗志超，何煜，李瑶艳，邵传强，杨晓飞. 离轴抛物面反射镜的投影畸变校正研究. 激光与红外. 2024(11): 1744-1750 .
3.	郝三峰，张建，杨建峰. F/0.78高次非球面零位补偿检测与投影畸变校正. 光子学报. 2023(02): 39-53 .
4.	吴天强，王义贺. 基于改进深度学习自编码的图像边沿畸变校正算法研究. 光电子·激光. 2021(02): 149-156 .
5.	苏虹，张运强. 自由空间中光信息传输模型下非线性JTC光学图像校正方法. 激光杂志. 2020(09): 127-131 .

Other cited types(4)

Get Citation

PDF

XML

Article views (980) PDF downloads (100) Cited by(9)

Turn off MathJax

Article Contents

Abstract

References

Effect of working angle on system sensitivity in laser triangulation