Thermal analysis and parameter optimization of spaceborne lidar filter

Zhang Yaya; Xu Mingming; Liu Dong; Bo Guangyu; Shen Wei; Chen Jiexiang

doi:10.5768/JAO201738.0407001

Journal of Applied Optics > 2017 > 38(4): 660-664. > DOI: 10.5768/JAO201738.0407001

Zhang Yaya, Xu Mingming, Liu Dong, Bo Guangyu, Shen Wei, Chen Jiexiang. Thermal analysis and parameter optimization of spaceborne lidar filter[J]. Journal of Applied Optics, 2017, 38(4): 660-664. DOI: 10.5768/JAO201738.0407001

Citation:

PDF (1412 KB)

Thermal analysis and parameter optimization of spaceborne lidar filter

1.
Anhui Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Hefei 230031, China
2.
University of Science and Technology of China, Hefei 230026, China

More Information

Received Date: March 02, 2017
Revised Date: March 30, 2017

Graphical Abstract

Abstract

Abstract

In order to effectively improve thermal insulation performance of filter components in subsequent optical system of spaceborne lidar, and ensure center wavelength tuning accuracy of F-P etalon which is core component by using hot-light characteristic of material, preliminary thermal structure for filter assembly is designed in this paper. Steady-state thermal analysis for initial structure of filter components is conducted by finite element software Ansys Workbench and heating power range is determined. Then key parameters of thermal structure are optimized by multi-objective based on sensitivity analysis and optimal value of each parameter is determined. Results show that maximum heating power is 7.05 W when temperature of F-P etalon reaches at 48℃, which saves power consumption of 11.3%. And maximum temperature difference of F-P etalon surface is reduced from 0.253℃ to 0.05℃, which meets requirements of design specifications.
- narrow band filter,
- F-P etalon,
- steady-state thermal analysis,
- sensitivity analysis,
- parameter optimization

FullText(HTML)

References (11)

References

[1]	Climate change 2007-the physical science basis: Working group Ⅰ contribution to the fourth assessment report of the IPCC[M]. UK: Cambridge University Press, 2007.
[2]	石广玉, 王标, 张华, 等.大气气溶胶的辐射与气候效应[J].湖北:地球科学, 2008, 32(4):826-840. http://d.old.wanfangdata.com.cn/Periodical/daqikx200804013 Shi Guangyu, Wang Biao, Zhang Hua, et al.The radiative and climatic effects of atmospheric aerosols[J].Chinese Journal of Atmospheric Sciences, Hubei:Earth Science, 2008, 32(4):826-840. http://d.old.wanfangdata.com.cn/Periodical/daqikx200804013
[3]	王英俭.激光雷达大气参数测量[M].北京:科学出版社, 2014. Wang Yingjian.Lidar atmospheric parameter measurement[M].Beijing:Science Press, 2014.
[4]	Zaun N H, Weimer C, Sidorin Y, et al.Solid-etalon for the CALIPSO lidar receiver[C].USA: SPIE, 2004: 141-145. doi: 10.1117/12.559883?SSO=1
[5]	Sidorin Y, Lunt D, Krainak M A, et al.Tunable solid-etalon filter for use in lidar receivers[C].USA: SPIE, 2004: 133-140. doi: 10.1117/12.548967.short?SSO=1
[6]	Li Q, Steven G P, Querin O M, et al.Shape and topology design for heat conduction by evolutionary structural optimization[J].International Journal of Heat & Mass Transfer, 1999, 42(17):3361-3371. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=a1793dfa031a0a0c8d1c017d3c44b391
[7]	Li Q, Steven G P, Xie Y M, et al.Evolutionary topology optimization for temperature reduction of heat conducting fields[J].International Journal of Heat & Mass Transfer, 2004, 47(23):5071-5083. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=dc6d073330ec86b677266dec8567cbe5
[8]	左孔天, 陈立平, 张云清, 等.用拓扑优化方法进行热传导散热体的结构优化设计[J].机械工程学报, 2005, 41(4):13-16. doi: 10.3321/j.issn:0577-6686.2005.04.003 Zuo Tiankong, Chen liping, Zhang Yunqing, et al, Structural optimal design of heat conductive body with topology optimization method[J].Chinese Journal of Mechanical Engineering, 2005, 41(4):13-16. doi: 10.3321/j.issn:0577-6686.2005.04.003
[9]	杨世铭, 陶文铨.传热学[M]. 3版.北京: 高等教育出版社, 1998. Yang Shiming.Heat transfer[M].3rd ed.Beijing: China Higher Education Press, 1998.
[10]	孙建勋, 潘雷, 谷良贤.基于响应面法的函数敏感性快速分析[J].中国机械工程, 2011(3):356-359. http://www.cnki.com.cn/Article/CJFDTotal-ZGJX201103023.htm Sun Jianxun, Pan lei, Gu liangxian.A quick sensitivity analysis tool based on response surface method[J].Chinese Journal of Mechanical Engineering, 2011(3):356-359. http://www.cnki.com.cn/Article/CJFDTotal-ZGJX201103023.htm
[11]	Grünschlo L, Raab M, Keller A. Enumerating quasi-monte carlo point sequences in elementary intervals[M].Berlin:Springer Berlin Heidelberg, 2012.

[1]	ZHAO Meiqi, ZHOU Wei, WANG Di, LYU Yan, LI Yushuang, PU Yu, LI Dong, FENG Qidong, CHEN Shuxian, LUO Yilang. Optimization analysis of optoelectronic parameters of laser telemetry systems for hydrogen leakage detection in hydrogen-involved equipment[J]. Journal of Applied Optics, 2024, 45(6): 1219-1227. DOI: 10.5768/JAO202445.0603002
[2]	ZHANG Wei, CHEN Wenjian, LI Wusen. Parameter optimization of laser displacement sensor based on gravitational search algorithm[J]. Journal of Applied Optics, 2024, 45(5): 1064-1071. DOI: 10.5768/JAO202445.0507002
[3]	LUO Yuxiang, YANG Huizhen, HE Yuanfeng, ZHANG Zhiguang. Hyper-parameter optimization of iterative control algorithms for adaptive optical systems[J]. Journal of Applied Optics, 2024, 45(1): 126-133. DOI: 10.5768/JAO202445.0102007
[4]	Nie Dexin, Chen Liankai, Jiang Guoyi, Liu Haibo, Pi Benxi, Zhang Weichao, Liu Jie, Zhang Luan. Extrinsic F-P fiber optic sensor design for partial discharge detection and sensitivity analysis[J]. Journal of Applied Optics, 2016, 37(6): 954-960. DOI: 10.5768/JAO201637.0608004
[5]	Duan Liangjun, Zhu Lianqing, Lou Xiaoping, Liu Chao. Structural parameters optimization of laser scanning probe visual system[J]. Journal of Applied Optics, 2016, 37(2): 308-314. DOI: 10.5768/JAO201637.0207002
[6]	WEN Ru-hong. Optimization of parameters and measurement on SPIDER[J]. Journal of Applied Optics, 2012, 33(6): 1092-1096.
[7]	FAN Yuan-yuan, SANG Ying-jun, SHEN Xiang-heng. Optimization of image quality assessment parameters based on back-propagation neural network[J]. Journal of Applied Optics, 2011, 32(6): 1150-1155.
[8]	FAN Zhi-gang, FU Qiang, CHEN Shou-qian, LU Tian-yu. ANew method for pupil phase mask optimization in wavefront coding system[J]. Journal of Applied Optics, 2011, 32(1): 1-6.
[9]	HUANG Shui-hua, ZHOU Quan, TAN Ji-chun. Sensitivity analysis of ellipsometric parameters in ellipsometric spectral measurement[J]. Journal of Applied Optics, 2009, 30(1): 84-88.
[10]	LIU Guo-hong, WU He-yun, ZHAO Qun, SHENG Shou-qi. Determining fabrication and assembly tolerance for off-axis three-mirror anastigmat by optimizing optical system[J]. Journal of Applied Optics, 2008, 29(1): 115-119.

Cited By

Cited by

Periodical cited type(3)

1.	邵甲第，王邦新，谢晨波，李路，庄鹏，方志远，付松琳，曹也，杨婧，吴德成. 星载激光雷达中固态标准具的结构设计及性能检测. 量子电子学报. 2020(02): 235-241 .
2.	田伟杰，王晓峰，罗杰. 基于微机电系统激光雷达测量技术的航天器隐藏目标点测量方法. 计算机测量与控制. 2020(03): 1-4+18 .
3.	杨明冬，傅焰峰，赵建宜，全本庆，关卫林，张玓. 外腔可调谐激光器热调谐标准具的热分析优化. 光通信研究. 2019(03): 37-41 .

Other cited types(3)

Get Citation

PDF

XML

Article views (731) PDF downloads (86) Cited by(6)

Turn off MathJax

Article Contents

Abstract

References

Thermal analysis and parameter optimization of spaceborne lidar filter