Design of uniform and long distance illumination

Xie Hongbo; Jiang Min; Yang Lei; Meng Qingbin; Fang Chunlun

doi:10.5768/JAO201738.0401005

Journal of Applied Optics > 2017 > 38(4): 543-548. > DOI: 10.5768/JAO201738.0401005

Xie Hongbo, Jiang Min, Yang Lei, Meng Qingbin, Fang Chunlun. Design of uniform and long distance illumination[J]. Journal of Applied Optics, 2017, 38(4): 543-548. DOI: 10.5768/JAO201738.0401005

Citation:

Xie Hongbo, Jiang Min, Yang Lei, Meng Qingbin, Fang Chunlun. Design of uniform and long distance illumination[J]. Journal of Applied Optics, 2017, 38(4): 543-548. DOI: 10.5768/JAO201738.0401005

Citation:

Xie Hongbo, Jiang Min, Yang Lei, Meng Qingbin, Fang Chunlun. Design of uniform and long distance illumination[J]. Journal of Applied Optics, 2017, 38(4): 543-548. DOI: 10.5768/JAO201738.0401005

PDF (3296 KB)

Design of uniform and long distance illumination

College of Precision Instrument and Opto-electronics Engineering, Key Laboratory of Opto-electronics Information Technology, Ministry of Education, Tianjin University, Tianjin 300072, China

More Information

Received Date: November 07, 2016
Revised Date: January 15, 2017

Graphical Abstract

Abstract

Abstract

In view of shortcomings of existing LED lighting system with large volume, complicated structure and short working distance, a new design method of single LED projection system with light weight, good uniformity and long distance illumination is proposed. Based on the theory of illumination design, combined with non-imaging design and imaging design method, a projection lighting system composed of single high power LED, condenser lens, aperture stop and projection objective is designed. Firstly, the condenser concentrates lights emitting from LED and converges them to lightening plane, and then objective lens project light spot at lightening plane onto receiving surface with specified distance. The system uses a full-transmission structure, easy to process and install.Single high-power LED as a light source can effectively reduce the system size and mass. Experimental results show that this system can form illumination with uniformity of more than 90% in the range of 3 m~3 km.The system ensure good image quality and distortion of projection plane being less than 5%, which can satisfy requirements of uniform illumination and projection over a long distance.
- LED illumination design,
- long distance projection,
- illumination uniformity,
- Kohler's illumination

FullText(HTML)

References (14)

References

[1]	罗毅, 冯泽心, 韩彦军, 等.面向半导体照明的光学[J].光学学报, 2011, 31(9):1-11. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=gxxb201109017 Luo Yi, Feng Zexin, Han Yanjun, et al. Optics in solid state lighting[J]. Acta Optica Sinica, 2011, 31(9):1-11. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=gxxb201109017
[2]	陈新睿, 韩敬华, 李洪儒, 等.基于近场均匀照明的LED阵列的优化设计[J].应用光学, 2014, 35(1):122-127. http://www.cnki.com.cn/Article/CJFDTotal-YYGX201401027.htm Chen Xinrui, Han Jinghua, Li Hongru, et al. Optical design of LED arrays for near-field uniform illumination[J].Journal of Applied Optics, 2014, 35(1):122-127. http://www.cnki.com.cn/Article/CJFDTotal-YYGX201401027.htm
[3]	Stevanovic L D, Mueller F J, Sundemann D K, et al. LED based light source with uniform light filed & well defined edges: US, 20040131157[P].2004-07-08.
[4]	刘欣. LED照明的透射-全反射型复合曲面二次光学透镜的设计[J].应用光学, 2011, 32(5):976-980. doi: 10.3969/j.issn.1002-2082.2011.05.032 Liu Xin. Total-internal-reflection compound secondary optical lens design of LED illumination[J]. Journal of Applied Optics, 2011, 32(5):976-980. doi: 10.3969/j.issn.1002-2082.2011.05.032
[5]	Koshel R J.照明工程: 非成像光学设计[M].葛鹏, 赵茗, 刘祥彪, 译.武汉: 华中科技大学出版社, 2015: 22-23. Koshel R J. Illumination engineering: design with nonimaging optics[M].Translated by Ge Peng, Zhao Min, Liu Xiangbiao.Wuhan: Huazhong University of Science & Technology Press, 2015: 22-23.
[6]	甄艳坤, 李岩, 白燕. TIR透镜优化设计在LED微投影显示系统中的应用[J].应用光学, 2009, 30(3):366-371. doi: 10.3969/j.issn.1002-2082.2009.03.002 Zhen Yankun, Li Yan, Bai Yan. Application of TIR lens optimization design in LED micro-projector[J]. Journal of Applied Optics, 2009, 30(3):366-371. doi: 10.3969/j.issn.1002-2082.2009.03.002
[7]	王程, 朱向冰, 田丽伟, 等.基于LED和复眼透镜的自适应前照灯的光学设计[J].激光与光电子进展, 2015, 52(4):167-173. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=jgygdzxjz201504024 Wang Cheng, Zhu Xiangbing, Tian Liwei, et al. Optical design of the adaptive front lighting system based on the LED and the fly's-eye lens[J]. Laser & Optoelectronics Progress, 2015, 52(4):167-173. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=jgygdzxjz201504024
[8]	鲍志聪.基于LED光源的自由曲面照明透镜的设计[D].北京: 清华大学, 2013. Bao Zhicong. Research on design of freeform surface lens for LED lighting system[D]. Beijing: Tsinghua University, 2013.
[9]	Allen S C. Remote phosphor LED illumination system: US, US8083364[P]. 2011-12-27.
[10]	Feng S, Li X N, Niu L. Long-range LED pilot lamp design[J]. Opto-Electronic Engineering, 2014(7):13-19. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=gdgc201407003
[11]	郁道银, 谈恒英.工程光学[M].北京:机械工业出版社, 2006:143-144. Yu Daoyin, Tan Hengying. Engineering optics[M]. Beijing: China Machine Press, 2006:143-144.
[12]	Roland W, Koshel R J. A study for the special Fresnel lens for high efficiency solar concentrators non-imaging optics and efficient illumination systems Ⅱ[J]. SPIE, 2005, 5942:293-301.
[13]	张以谟.应用光学[M].北京:北京电子工业出版社, 2008:466-468. Zhang Yimo. Applied optics[M]. Beijing: Publishing House of Electronics Industry, 2008:466-468.
[14]	ISO/IEC21118-2005. Information to be included in specification sheets-data projectors[S].Geneva, Switzerland: International Organization for Standardization, 2005.

[1]	HE Qing, ZHANG Zhenglin, KANG Yaojun. Structural optimization design of LED railway signal lens based on free-form surface[J]. Journal of Applied Optics, 2025, 46(1): 80-88. DOI: 10.5768/JAO202546.0101007
[2]	YAO Hongbing, WANG Xuanqi, XIN Zhonghua. Optical design of automobile headlamp based on ADB[J]. Journal of Applied Optics, 2019, 40(4): 663-668. DOI: 10.5768/JAO201940.0405001
[3]	Yao Hongbing, Wang Dandan, Xin Zhonghua, Xu Jin, Liu Min. Optical design of 3 independent freeform surface LEDs automotive dipped headlamp[J]. Journal of Applied Optics, 2016, 37(3): 435-440. DOI: 10.5768/JAO201637.0305001
[4]	BAI Ying, LIN Wen-shuo, XIE Guo-qing. Light distribution design of LED lamps in classroom based on compound parabolic collector[J]. Journal of Applied Optics, 2014, 35(3): 395-399.
[5]	FAN Lu-qing, LI Xiang-ning, WANG Yu, LIU Jie. TIR collimating lens design based on freeform surface[J]. Journal of Applied Optics, 2013, 34(2): 325-329.
[6]	QIAO Qing-fei, LIN Feng. Freeform surface secondary lens for LED streetlight[J]. Journal of Applied Optics, 2012, 33(4): 675-679.
[7]	KAN Zi-xiong, WAN Qiao-bin, REN Hao, CHEN Zhen-qiang. Simulation and analysis for road lighting with LED luminaries[J]. Journal of Applied Optics, 2012, 33(2): 374-379.
[8]	SHI Yong-sheng, MAI Di, NING Lei. Realization of LED uniform lighting on different occasions[J]. Journal of Applied Optics, 2011, 32(4): 613-617.
[9]	LI Jing. Lens design for uniform illumination of rectangle area with LED[J]. Journal of Applied Optics, 2011, 32(2): 211-214.
[10]	LU Zheng, XU Tao. Selection of standard LED by luminous intensity distribution curve[J]. Journal of Applied Optics, 2008, 29(6): 926-930.

Cited By

Cited by

Periodical cited type(8)

1.	杜国军，王春雨，欧宗耀，王聪，胡斌. 多基准轴透射式系统装调方法. 应用光学. 2021(02): 247-254 . 本站查看
2.	邓佳逸，常伟军，王楠茜，邱亚峰. 基于反射式平行光管法的紫外透镜焦距测试研究. 红外技术. 2021(10): 925-929 .
3.	王东杰，柯君玉，王海超，阴刚华. 光学装调中的一种基于猫眼效应的焦距测试方法. 光学技术. 2020(04): 466-471 .
4.	赵希婷，张超，冀翼，刘辉，焦文春，黄阳，李重阳，张志飞. 超宽视场离轴光学系统畸变一致性校正技术. 应用光学. 2020(05): 1032-1036 . 本站查看
5.	邢辉，张占东，刘剑峰，宋俊儒，金忠瑞，刘志远. 多谱段多通道离轴三反空间相机装调. 红外. 2020(12): 1-11 .
6.	李晓磊. 基于平行光管法的薄凸透镜焦距测量. 应用光学. 2019(05): 859-862 . 本站查看
7.	裴昱，陈远鸣，卞晓阳，赵勇毅，赵正杰，常建华. 基于RBF神经网络气压补偿的非色散红外SF_6气体传感器. 应用光学. 2018(03): 366-372 . 本站查看
8.	蒋正东，朱荣刚，陈磊，何勇. 基于双朗奇光栅的焦距测量技术研究. 应用光学. 2018(05): 687-690 . 本站查看

Other cited types(1)

Get Citation

PDF

XML

Article views (1143) PDF downloads (196) Cited by(9)

Turn off MathJax

Article Contents

Abstract

References

Design of uniform and long distance illumination