Optical axis parallelism adjusting instrument for multichannel photoelectric system

[1]Li Gang, Zhou Bing, Sun Xinhua, et al. Handy method to detect divergence angle and optical axis parallelism of laser guidance device［J］．Optical Technique,2004, 30(5):628 636. 李刚, 周冰, 孙新华,等.激光制导装置出射激光束散角和光轴平等性的简易检测方法 [J].光学技术,2004, 30(5):628636. [2]Xi’an University of Posts and Telecommunications. A kind of multichannel optical axis adjustment device: China, 201420511864.5[P].20141114. 西安邮电大学.一种多通道光电系统光轴一致性调整装置：中国，201420511864.5[P].20141114. [3]Ling Jun, Liu Bingqi, Zhao Xilin. The comparison and discussion of several testing methods about opticalaxis parallelism[J].Journal of Applied Optics,2003,24(1):4345. 凌军,刘秉琦,赵熙林.几种光轴平行性测试方法的比较与探讨[J].应用光学,2003,24(1):4345. [4]Ao Lei, Tan Jiubin, Cui Jiwen, et al. Precise center location algorithm for circle target in CCD laser dual axis autocollimator[J].Optical and Precision Engineering, 2005,13(6):668673. 敖磊,潭久彬,崔继文,等.激光CCD二维自准直仪中圆目标中心精确定位算法[J].光学精密工程, 2005,13(6):668673. [5]Zhao Desheng, Li Caiqin, Zhang Xue. Influence of clearance on sensitivity of crankslider mechanism[J].Journal of Xi’an University of Posts and Telecommunications,2011,16（5）：98100. 赵德胜，李彩琴，张雪.间隙对曲柄滑块机构灵敏度的影响研究[J].西安邮电学院学报，2011,16（5）：98100. [6]Yao Duoshun, Li Nanqian, Kang Wenli. Method of designing linearization doublelinkage continuous zoom lens［J］．2015,36(1):18. 姚多舜，李楠茜，康文莉.线性双组联动型连续变焦光学系统设计［J］．2015,36(1):18. [7]Lu Hongming. Study on the influence of boundary conditions on the finite element analysis of short beam［J］．Chinese Journal of Engineering design, 2013, 20(4):321325. 吕红明．边界条件对短梁结构有限元分析影响的研究［J］．工程设计学报，2013，20(4):321325． [8]Xu Gening, Feng Xiaolei, Tao Yuanfang, et al. Impact of boundary conditions on the result of FEM analysis of mechanical structures［J］．Hoisting and Conveying Machinery, 2010(2):6064. 徐格宁，冯晓蕾，陶元芳，等．边界条件对机械结构有限元分析结果的影响［J］．起重运输机械，2010(2):6064． [9]Wang Xiaochen, Pu Junping. The finite element analysis of nonuniform beams［J］．Journal of Zhejiang University of Technology，2008，36(3):311315．王晓臣，蒲军平.变截面梁有限元分析［J］．浙江工业大学学报，2008，36(3):311315． [10]He Zhicheng, Chen Shaowei, Li Guangyao, et al. Topology optimization using FSFEM for complex threedimensional models[J]. Chinese Journal of Mechanical Engineering，2015,26（7）：864870. 何智成,陈少伟,李光耀,等.基于面光滑有限元的复杂三维结构拓扑优化[J].机械工程学报，2015,26（7）：864870. [11]Li Xiaoli, Yuan Yuan. Finite element analysis of driving drum of belt conveyor based on COSMOS/Works[J].Mei Kuang Jixie Coal Mine Machinery，2010，31(9):9596．李晓丽，袁圆．基于COSMOS/Works的带式输送机传动滚筒的有限元分析［J］．煤矿机械，2010，31(9):9596． [12]Luo Pei. Structural damage analysis of simplesupported beam based on finite element simulation［J］．Journal of Test And Measurement Technology，2011，25(5):440444．罗裴．基于有限元仿真的简支梁结构损伤分析［J］．测试技术学报，2011，25(5):440444．