-
摘要: 为了获得1064nm,1319nm,589nm及660nm 4波长激光同时输出,设计了双激光晶体同步声光调Q“T”型复合谐振腔。通过软件模拟与计算,筛选出理想的谐振腔参数,使2波长基频光在大泵浦电流范围内能稳定运转。以KTP晶体和LBO晶体为和频晶体和倍频晶体,在泵浦电流为17A,重复频率为10kHz时,获得了1064nm,1319nm,589nm和660nm 4波长激光输出,最高平均功率分别为150mW,80mW,2.3W和1.7W,同时测得589nm激光和660nm激光的脉冲宽度分别为110ns和130ns。结果表明:使用热稳“T”型复合腔,可以获得4波长激光同时稳定输出。
-
关键词:
- 二极管侧面抽运固体激光器 /
- 4波长激光 /
- 内腔和频 /
- 内腔倍频 /
- 声光调Q
Abstract: In order to obtain the four-wavelength laser of 1064nm, 1319nm, 589nm and 660nm simultaneously, two-rod “T”-shaped composite cavity was designed. By simulation and calculation, perfect resonator parameters were chosen to make two fundamental lasers operate stably in large range of pumping current. Taking KTP and LBO crystals as sum-frequency and SHG crystals respectively, when the pumping current is 17A and the repetition rate is 10kHz, the highest average power of 1064nm, 1319nm, 589nm and 660nm is 150mW, 80mW, 2.3W and 1.7W respectively, and the pulse widths of 589nm and 660nm laser are 110ns and 130ns. The result shows that the fourwavelength laser output could be simultaneously obtained by a thermostable “T”-shaped composite cavity. -
计量
- 文章访问数: 3037
- HTML全文浏览量: 118
- PDF下载量: 947