移动式多功能光电测试系统

Mobile multifunction optoelectronic testing system

  • 摘要: 针对现有实验室静态测试与评估方法不能满足安装在武器平台上光电传感系统性能检测的要求,介绍一种野外移动式多功能光电测试靶的原理、构成、功能及技术性能指标。多功能光电测试靶(1.5m×1.5m)由7×7点阵热目标靶、宽光谱激光漫反射板和5个方位多波段激光探测器3部分组成,可产生4杆靶标、十字靶标、方靶及多目标靶等温差(最大温差为80℃)红外靶。激光波长范围为1.06μm~10.6μm,响应时间<1ns。计算机控制系统热靶图案、温度设定、靶的方位和俯仰控制。靶的高度升降范围为2m~8m,全系统集成安装到3m×5m平板拖车上时可用于光电对抗性能测试及模拟训练。

     

    Abstract: Since the test and evaluation methods now available are not adequate for fully assessing the performance of optoelectronic sensors installed on the weapon system platforms, the principle,constitution,function and qualification of the field mobile multifunction optoelectronic testing target are introduced in the paper. The 1.5m×1.5m target is composed of a 7×7 lattice thermal target, a laser diffuse reflection target with wide spectrum and 5 laser detectors with multiorientation and multiwaveband. Applicable laser wavelength ranges is 1.06μm~10.6μm, and the responding time is less than 1ns. The thermotarget pattern, temperature setting, azimuth and pitching of the target are controlled by a PC system. The updown height of the target can be controlled at 2m~8m. If the whole system is mounted on a plain trailer of 3m×5m, it can be used for the performance testing and simulation training of the optoelectronic countermeasure.

     

/

返回文章
返回