潜望式瞄准镜中消像旋棱镜的装调工艺技术

惠刚阳, 杨海成, 姜峰, 张燕, 王章利

惠刚阳, 杨海成, 姜峰, 张燕, 王章利. 潜望式瞄准镜中消像旋棱镜的装调工艺技术[J]. 应用光学, 2013, 34(4): 700-705.
引用本文: 惠刚阳, 杨海成, 姜峰, 张燕, 王章利. 潜望式瞄准镜中消像旋棱镜的装调工艺技术[J]. 应用光学, 2013, 34(4): 700-705.
HUI Gang-yang, YANG Hai-cheng, JIANG Feng, ZHANG Yan, WANG Zhang-li. Alignment technology of offsetting image rotation prism in periscopic sight[J]. Journal of Applied Optics, 2013, 34(4): 700-705.
Citation: HUI Gang-yang, YANG Hai-cheng, JIANG Feng, ZHANG Yan, WANG Zhang-li. Alignment technology of offsetting image rotation prism in periscopic sight[J]. Journal of Applied Optics, 2013, 34(4): 700-705.

潜望式瞄准镜中消像旋棱镜的装调工艺技术

详细信息
    通讯作者:

    惠刚阳(1978-),男,陕西富平人,高级工程师,主要从事光电仪器的装调工艺研究工作。 Email: 30892809@qq.com

  • 中图分类号: TN205

Alignment technology of offsetting image rotation prism in periscopic sight

  • 摘要: 当潜望式光学系统中反射镜绕机械轴转动时,影像会在视场中绕光轴旋转严重影响观瞄。消像旋棱镜可以使像产生反向转动从而消除这种影响。从探索潜望式瞄准镜中消像旋棱镜的装调工艺出发,通过对2种常用消像旋棱镜在光学系统中对光线折转的分析,提出了其光机装调过程的判断依据,总结了2种消像旋棱镜应用的装调工艺方法,并提出了在平行光路中检测消像旋棱镜固定前后的分辨率以保证成像质量。经过多个项目的验证,此方法能有效降低消像旋棱镜的装调难度,装调后消像旋棱镜光轴与系统基准轴偏差控制在30以内。
    Abstract: When the reflection optical system of periscope mirror rotates around mechanical shaft, the reflected image in the view field rotates around the optical axis which greatly affects observation. Offsetting image rotation prisms can eliminate the influence by spinning in the opposite direction. Though the analysis of two widely used offsetting image rotation systems, the criterion of the assembly process is raised, two typical methods for offsetting image rotation prisms are concluded, and the detection of offsetting image rotation prism fixed before and after the resolution in parallel light is put forward to ensure the imaging quality. The method is proved to be effective in reducing the difficulties in alignment of offsetting image rotation prism system and improving image quality. The windage between the optical axis of the offsetting image rotation prisms and system norm axis can be controlled less than 30.
  • [1]李政阳,付跃刚. 直角屋脊棱镜与立方角锥棱镜的光学特性[J]. 应用光学, 2008, 29(5): 833-836.
    LI Zheng-yang, FU Yue-gang. Optical characteristics of right-angle roof prism and corner-cube prism[J]. Journal of Applied Optics, 2008, 29(5): 833-836. (in Chinese with an English abstract)
    [2]郑列华,尹达一. K镜消像旋机构在海洋卫星水色仪中的应用[J]. 红外技术, 2007, 29(1): 17-21.

    ZHENG Lie-hua, YIN Da-yi. Application for offsetting image rotation “K mirror” in COCTS[J]. Infrared Technology, 2007, 29(1): 17-21. (in Chinese with an English abstract)
    [3]蒋世磊. 别汉棱镜的旋像精度分析和装校方法[J]. 光电工程, 1991, 18(6): 50-56.
    JIANG Shi-lei. The image rotation accuracy analysis and the adjustment method for the rotating image Pechan prism[J]. Opto-Electronic Engineering, 1991, 18(6): 50-56. (in Chinese with an English abstract)
    [4]郁道银,谈恒英. 工程光学[M]. 北京:机械工业出版社, 2006.
    YU Dao-yin, TAN Heng-ying. The engineering optics[M]. Beijing: China Machine Press, 2006. (in Chinese)
    [5]张凯,付跃刚. 大口径像旋补偿系统的分析与设计[J]. 应用光学, 2009, 30(3): 403-406.
    ZHANG Kai, FU Yue-gang. Analysis and design of large-aperture image-rotation compensation system[J]. Journal of Applied Optics, 2009, 30(3): 403-406. (in Chinese with an English abstract)
    [6]关敏,郭强. 光学像消旋系统在FY3 MERSI图像定位中的应用[J]. 应用气象学报, 2008, 19(4): 420-426.
    GUAN Min, GUO Qiang. Application for optical offsetting image rotation in image orientation of FY-3 MERSI[J]. Journal of Applied Meteorological Science, 2008, 19(4): 420-426. (in Chinese with an English abstract)
    [7]刘俞铭. 光学仪器设计生产与装配、检校及光学冷加工新工艺新技术、质量检验标准规范实务全书[M].北京:北方工业出版社, 2006.
    LIU Yu-ming. Optical apparatus design manufacture and assembly, check and optical cold working new technics new art, quality test standard criterion[M]. Beijing: The Publishing House of North Industry, 2006. (in Chinese)
    [8]《光学仪器设计手册》编辑组. 光学仪器设计手册[M]. 北京:国防工业出版社, 1971.
     The editorial staff of the optical instrument design handbook. The optical instrument design handbook[M]. Beijing: National Defence Industry Press, 1971. (in Chinese)
计量
  • 文章访问数:  2732
  • HTML全文浏览量:  143
  • PDF下载量:  432
  • 被引次数: 0
出版历程
  • 刊出日期:  2013-07-14

目录

    /

    返回文章
    返回