大尺寸空间角测量技术进展及其分析

陈志斌, 肖文健, 马东玺, 刘先红, 肖程, 秦梦泽

陈志斌, 肖文健, 马东玺, 刘先红, 肖程, 秦梦泽. 大尺寸空间角测量技术进展及其分析[J]. 应用光学, 2016, 37(3): 407-414. DOI: 10.5768/JAO201637.0303002
引用本文: 陈志斌, 肖文健, 马东玺, 刘先红, 肖程, 秦梦泽. 大尺寸空间角测量技术进展及其分析[J]. 应用光学, 2016, 37(3): 407-414. DOI: 10.5768/JAO201637.0303002
Chen Zhinbin, Xiao Wenjian, Ma Dongxi, Liu Xianhong, Xiao Cheng, Qin Mengze. Technical progress and analysis on largescale spatial angle measurement[J]. Journal of Applied Optics, 2016, 37(3): 407-414. DOI: 10.5768/JAO201637.0303002
Citation: Chen Zhinbin, Xiao Wenjian, Ma Dongxi, Liu Xianhong, Xiao Cheng, Qin Mengze. Technical progress and analysis on largescale spatial angle measurement[J]. Journal of Applied Optics, 2016, 37(3): 407-414. DOI: 10.5768/JAO201637.0303002

大尺寸空间角测量技术进展及其分析

基金项目: 

国家自然科学基金(51305455)

详细信息
    作者简介:

    陈志斌(1965-),男,湖南益阳人,博士,研究员,主要从事光电检测方面的研究。 E-mail:shangxinboy@163.com

  • 中图分类号: TN206; TH741

Technical progress and analysis on largescale spatial angle measurement

  • 摘要: 随着大型装备制造工业飞速发展,其制造与装配等过程对大尺寸空间几何量的测量技术要求越来越高。为了分析大尺寸空间几何量测量中的空间角测量技术的发展,在综述5种传统大尺寸空间角测量方法的基础上,介绍了大尺寸空间角测量方面国内外相关研究的3种新的代表性成果。着重阐述了一种基于惯性基准的大尺寸空间角测量方法,该方法将光电自准直跟踪技术与惯性测量技术有机结合,测量范围更大、便携性更强,特别适合外场条件下大尺寸空间角的快速测量。测试结果表明,目前其有效测量范围可达10 m,测量精度为0.5,同时还针对系统测量范围与测量精度的进一步提高提出了改进方案。
    Abstract: With the rapid development of large equipment manufacturing industry, the manufacture and assembly processes have increasingly higher demands on largescale spatial geometric quantity measurement. In order to analyze the development of angle measurement technology in largescale spatial geometric quantity measurement, 5 traditional methods were reviewed, and 3 new related research achievements about angle measurements were introduced. Then combining the optical selfcollimation tracking technology and inertial measurement technology, a novel largescale spatial angle measurement method based on inertial reference was elaborated. The method can perform portability, versatility and strong antiinterference ability and it is very suitable for field measurement. Test results show that the current measurement range is 10 m and the measurement accuracy is 0.5 .Additional the improving schemes for the measurement range and accuracy were put forward.
  • [1]Ester  W T, Edmondson  K L, Peggs  G N, et al. Largescale metrologyan update[J]. Ann.CIRP, 2002, 51(2):587609.
    [2]Cuypers W,  Gestel N Van,  Voet A, et al. Optical measurement techniques for mobile and largescale dimensional metrology [J]. Optics and Lasers in Engineering,2009,47(3):292300.
    [3]Zhu Jigui, Wang Dawei,Wang Xin,et al. Key techniques on optical coordinate measuring system[J]. Infrared and Laser Engineering,2007,36(3):296299.
    邾继贵,王大为,王鑫,等. 光学坐标测量系统中的关键技术[J]. 红外与激光工程,2007,36(3) 296299.
    [4]Zhong Kai. Research on combined largescale metrology system[D].Wuhan:Huazhong University of Science & Technology,2009.
    钟凯.组合式大尺寸测量系统研究[D].武汉:华中科技大学,2009.
    [5]Zhou Fuqiang,Zhang Guangjun,Jiang Jie.Threedimensional coordinate measuring system with binotheodolites on site[J].Chinese Journal of Mechanical Engineering,2004,40(1):165169.
    周富强,张广军,江洁. 现场双经纬仪三维坐标测量系统[J]. 机械工程学报,2004,40(1):165169.
    [6]Zhang Zili. Study on the largescale space coordinate measurement method based on vision guidance[D].Tianjin:Tianjin University,2010.
    张滋黎.基于视觉引导的大尺度空间坐标测量方法[D].天津:天津大学,2010.
    [7]Zhang Zili, Zhu Jigui, Zhou Hu, et al. Laser automatic theodolite measurement system based on vision guidance[J]. Journal of Optoelectronics·Laser,2011, 22(1):115119.
    张滋黎,邾继贵,周虎,等.一种基于视觉引导的激光经纬仪自动测量系统[J].光电子·激光,2011, 22(1):115119.
    [8]Zhang Zili, Zhu Jigui, Zhou Weihu. Error calibration and correction of mirror tilt in laser trackers[J] . Optics and Precision Engineering, 2015, 23 (5):12051212.
    张滋黎,朱涵,周维虎. 激光跟踪仪转镜倾斜误差的标定及修正[J] .光学精密工程, 2015, 23 (5):12051212.
    [9]Xue Bin,Zhu Jigui,Yang Linghui, et al. The application of the wMPS in airplane level measurement[J]. OptoElectronic Engineering, 2014,41(8):2226.
    薛彬,邾继贵,杨凌辉,等. wMPS 系统在飞机水平测量中的应用[J].光电工程, 2014,41(8):2226.
    [10]Muelaner J E,  Maropoulos P G. Large volume metrology technologies for the light controlled factory[J].Procedia CIRP,2014,25:169176.
    [11]Guo Lie. Study on key techniques of precision portable vision metrology [D]. Tianjin:Tianjin University,2011.
    郭磊.移动视觉精密测量关键技术研究[D].天津大学,2011.
    [12]Yang Jian. Research on the accuracy theory and experiment of largescale vision measurement [D].Beijing:Beijing University of Posts and Telecommunications, 2010.
    杨剑.大尺寸视觉测量精度的理论和实验研究[D].北京:北京邮电大学,2010.
    [13]Zhang G X,  Yao J W,  Qiu Z R,et al. Largescale space angle measurement [J].CIRP Annals Manufacturing Technology ,2008,57(1):525528.
    [14]Hu Wenchuan,Qiu Zurong,Zhang Guoxiong. Measurement of largescale space angle formed by nonuniplanar lines[J]. Optics and Precision Engineering, 2012,20(7):14271433.
    胡文川,裘祖荣,张国雄.大尺寸空间异面直线夹角的检测[J]. 光学精密工程, 2012,20(7):14271433.
    [15]Franceschini F, Galetto M, Maisano D,et al. Mobile spatial coordinate measuring system (MScMS)introduction to the system[J]. International Journal of Production Research,2009,47(14):38673889.
    [16]Franceschini F, Maisano D,Mastrogiacomo L. Mobile spatial coordinate measuring system (MScMS) and CMMs:a structured comparison[J]. The International Journal of Advanced Manufacturing Technology, 2009,42(11):10891102.
    [17]Franceschini F, Galetto M, Maisano D,et al. Online diagnostics in the mobile spatial coordinate measuring system (MScMS)[J]. Precision Engineering ,2009, 33(4):408417.
    [18]Maisano D A,  Jamshidi J,  Franceschini F. A comparison of two distributed largevolume measurement systems:the mobile spatial coordinate measuring system and the indoor global positioning system[J]. Proceedings of the Institution of Mechanical Engineers,2009,223(5):511521.
    [19]Galetto M, Mastrogiacomo L, Moroni G, et al. Artifactbased calibration and performance verification of the MScMSII[J]. Procedia CIRP, 2015,27:7783.
    [20]Galetto M,Mastrogiacomo L, Pralio B.MScMSII:an innovative IRbased indoor coordinate measuring system for largescale metrology applications[J]. The International Journal of Advanced Manufacturing Technology, 2011,52(1):291302.
    [21]Li Yuhe, Qiu Yongrong,Chen Yanxiang,et al. A novel orientation and position measuring system for large & medium scale precision assembly[J]. Optics and Lasers in Engineering,2014,62(11):3137.
  • 期刊类型引用(1)

    1. 王中,赵士桢,郑拓. PWM方波边沿时间对机动车流量输出调节系统电磁辐射发射的影响. 上海计量测试. 2023(03): 2-5 . 百度学术

    其他类型引用(1)

计量
  • 文章访问数:  1375
  • HTML全文浏览量:  81
  • PDF下载量:  97
  • 被引次数: 2
出版历程
  • 收稿日期:  2015-10-24
  • 修回日期:  2016-01-19
  • 刊出日期:  2016-05-14

目录

    /

    返回文章
    返回