Design of infrared zoom projection optical system
-
摘要: 根据外场测试要求，设计一套精确变焦的大口径投影光学系统，为系统性能测试评估提供远场至近场的目标成像模拟，系统由精确变焦系统和大口径投影系统两部分组成。根据被测系统口径及所成像点大小要求，在保证光瞳衔接和口径匹配的前提下，对大口径投影光学系统和精确变焦系统进行了光学参数计算和像质优化。变焦系统工作波段为8 m ~12 m，变倍比为16x，大口径投影光学系统口径为300 mm，模拟实验结果表明，该系统在变焦过程中像面稳定，各焦距位置MTF曲线接近衍射极限，满足外场测试实验要求。Abstract: According to the validation requirements of the field test, a large aperture optical system with precisely zooming was designed, in order to provide target imaging simulation from near field to far field to test and evaluate the system performance. The system has two parts: zoom system and projection system. Based on the requirements of beam aperture and image size on the unit to be tested, and with the precondition of pupil connection and aperture matching principle, the optical parameters of projection system and zoom system were calculated and the image quality was optimized. The zoom system works between 8 m ~12 m in far-infrared band with a 16x zoom ratio. The large-aperture projection system has a 300mm aperture. Simulation experiment results show that, the image position is stable and the modulation transfer function (MTF) curve of each focal length is close to the diffraction limit during zoom process, which could meet the test requirement exactly.
-
Keywords:
- optical design /
- infrared zoom /
- projection system
-
-
[1]Gong Xueping, Fei hailun.Situation and development of infrared imaging guidance hardware in the loop simulation [J]. Infrared and Laser Engineering,2000, 29(2):51-56.
贡学平，费海伦.红外成像制导半实物仿真现状与发展[J].红外与激光工程，2000，29（2）:51-56.
[2]Wang Zhile,Zhang Wei.Study of IR imaging target simulator based on zoom system [J]. Optical Technique, 2004,30(4): 420-422.
王治乐，张伟.基于变焦系统的红外成像目标模拟器研究[J].光学技术，2004，30（4）:420-422.
[3]Ding Quanxin,Liu Hua.Current development and thought on simulation,test and evaluation of the infrared imaging system[J].Infrared and Laser Engineering,2009,38(5):753-758.
丁全心，刘华.红外成像系统仿真、测试与评价的发展与思考[J].红外与激光工程，2009，38（5）:753-758.
[4]Tao Chunkan. Zoom optics system design [M]. Beijing: National Defense Industry Press, 1988: 45-48.
陶纯堪.变焦距光学系统设计[M].北京：国防工业出版社，1988:45-48.
[5]Liu Feng, Xu Xiping, Sun Xiangyang. Design of high zoom ratio thermal infrared zoom optical system [J]. Journal of Applied Optics, 2009,30(6): 1020-1023.
刘峰，徐熙平，孙向阳.高变倍比红外变焦距光学系统设计[J].应用光学，2009,30（6）:1020-1023.
[6]Pan Junhua.Design,fabrication and testing of optical asphere[M].Suzhou:Publishing Company of Suzhou University, 2004: 22-26.
潘君骅.光学非球面的设计、加工与检验[M].浙江：苏州大学出版社，2004:22-26.
[7]Zhang Liang, Liu Hongxia. Optical system design of long wave infrared zoom lens [J].Infared and Laser Engineering, 2011, 40(7):1279-1309.
张良，刘红霞.长波红外连续变焦光学系统的设计[J].红外与激光工程，2011，40（7）:1279-1309.
[8]Jamieson T H. Diffraction limited infrared zoom collimator [J]. SPIE,1997,3129:131-137. -
期刊类型引用(2)
1. 孙磊，金东东，纪春恒，裴崇雷，安鸿波，段恩悦. 基于增强型CCD探测器的距离选通三维成像不均匀性补偿方法. 兵工学报. 2023(08): 2495-2502 . 
百度学术
2. 郝芳，张平，杨海金，王瑶，卞臻臻，詹江，郑伟，梁琦. 浅析光纤倒像器固有误差对应用的影响. 应用光学. 2022(06): 1153-1157 . 本站查看
其他类型引用(1)
计量
- 文章访问数: 1845
- HTML全文浏览量: 142
- PDF下载量: 273
- 被引次数: 3
下载:
陕公网安备 61011302001501号 